Catalogs >
TAILOR PIXELS TECHNOLOGY CO., LTD. >
Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600)

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600)
16Pages

Catalog excerpts

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 1

Manufacturer Certificated Product Specification Model: TTX070BHT-01 7.0″TFT Display Module (1024*600) This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com tailor@tailorpixels.com Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd.

Open the catalog to page 1

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 2

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 2

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 3

TAILOR PIXELS TECHNOLOGY CO., LTD. Issued Date First Release.

Open the catalog to page 3

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 4

TAILOR PIXELS TECHNOLOGY CO., LTD. Feature Size Resolution Interface Color Depth Technology type Display Spec. Pixel pitch (mm) Pixel Configuration Display Mode Surface Treatment Viewing Direction Gray Viewing Direction LCM (W x H x D) (mm) Active Area(mm) With /Without TSP Weight (g) LED Numbers Spec 7-inch 1024(horizontal)*600(Vertical) LVDS 16.7M a-Si 0.1506(H)×0.1432(V) R.G.B. Vertical Stripe Normally Black Anti-Glare ALL FREE 164.9*100.0*2.8 154.21 x 85.92 Without RTP TBD 27 LEDs Note 1: Viewing direction follows the data measured by optics equipment. Note 2: Requirements on...

Open the catalog to page 4

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 5

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 5

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 6

TAILOR PIXELS TECHNOLOGY CO., LTD. Symbol VCOM VDD NC RESET STBYB GND RXIN0RXIN0+ GND RXIN1RXIN1+ GND RXIN2RXIN2+ GND RXCLKI RXCLKI GND RXIN3RXIN3+ GND NC GND NC Ground. No connection. Ground. No connection. SELB=0 LVDS 8 BIT SELB=1 LVDS 6BIT Power for analog circuit Gate Up or Down scan control. UPDN = “L”, STV2 output vertical start pulse and UD pin output logical “0” to Gate driver. UPDN = “H”, STV1 output vertical start pulse and UD pin output logical “1” to Gate driver. Function Common voltage Power supply No connection. Reset pin, normally pull high Standby mode control pin,normally...

Open the catalog to page 6

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 7

TAILOR PIXELS TECHNOLOGY CO., LTD. 5. Absolute Maximum Ratings 5.1 Electrical Absolute Maximum Ratings.(Vss=0V ,Ta=25℃) Item Power Supply Voltage Notes: 1. If the module is above these absolute maximum ratings. It may become permanently damaged. Using the module within the following electrical characteristic conditions are also exceeded, the module will malfunction and cause poor reliability. 2. VDD >VSS must be maintained. 5.2 Environmental Absolute Maximum Ratings. Ambient Temperature 1. The response time will become lower when operated at low temperature. 2. Background color changes...

Open the catalog to page 7

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 8

TAILOR PIXELS TECHNOLOGY CO., LTD. 6.Electrical Characteristics 6.1 Driving TFT LCD Panel Power supply Power supply Power supply Power supply Power supply Input voltage 6.2 Interface Timing 6.2.1 AC Characteristics

Open the catalog to page 8

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 9

TAILOR PIXELS TECHNOLOGY CO., LTD. 6.2.2 Input timing table

Open the catalog to page 9

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 10

TAILOR PIXELS TECHNOLOGY CO., LTD. 6.2.3 DATA INPUT FORMAT

Open the catalog to page 10

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 11

TAILOR PIXELS TECHNOLOGY CO., LTD. 6.3 Driving Backlight Item Forward Current Forward Voltage Life Time Note 1: Each LED: IF =20 mA, VF =3.0V. Note 2: Optical performance should be evaluated at Ta=25℃ only. Note 3: If LED is driven by high current, high ambient temperature & humidity condition. The life time of LED will be reduced. Operating life means brightness goes down to 50% initial brightness. Typical operating lifetime is estimated data.

Open the catalog to page 11

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 12

TAILOR PIXELS TECHNOLOGY CO., LTD. Test Conditions: 1. IF= 20mA (one channel), the ambient temperature is 25°C. 2. The test systems refer to Note 1 and Note 2. Note 1: Definition of optical measurement system. The optical characteristics should be measured in the darkroom. After 5 minutes of operation, the optical properties are measured at the center point of the LCD screen. All input terminals LCD panel must be ground when measuring the center area of the panel.

Open the catalog to page 12

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 13

TAILOR PIXELS TECHNOLOGY CO., LTD. Note 2: Definition of viewing angle range and measurement system. Viewing angle is measured at the center point of the LCD by CONOSCOPE (ergo-80). Note 3: Definition of contrast ratio Note 4: Definition of Response time The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%

Open the catalog to page 13

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 14

TAILOR PIXELS TECHNOLOGY CO., LTD. Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. Note 6: Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer Fig. 2). Every measuring point is placed at the Center of each measuring area Luminance Uniformity (U) = Lmin/ Lmax X100% L-------Active area length W----- Active area width Fig. 2 Definition of uniformity Lmax: The measured maximum luminance of all measurement position. Lmin: The measured minimum luminance of all measurement position. Note 7: Definition of...

Open the catalog to page 14

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 15

TAILOR PIXELS TECHNOLOGY CO., LTD. 8 Environmental / Reliability Tests No Test Item High Temperature Operation High Temperature Storage Low Temperature Storage High Temperature & Humidity Storage -30℃ 30 min ~ +80℃ 30 min Change time: 5min, 30 Cycle Thermal Shock (Non-operation) Electro Discharge (Operation) Vibration (Non-operation) Shock (Non-operation) Package Drop Test C=150pF, R=330 Ω, 5 points/panel Air:±8KV, 5 times; Contact: ±4KV, 5 times; (Environment: 15℃ ~ 35℃, 30% ~ 60%, 86Kpa ~ 106Kpa) Frequency range: 10~55Hz, Stroke: 1.mm Sweep: 10Hz~55Hz~10Hz 2 hours for each direction of...

Open the catalog to page 15

Product Specification Model:TTX070BHT-01 7.0″TFT Display Module (1024*600) - 16

TAILOR PIXELS TECHNOLOGY CO., LTD. 9 Precautions For Use of LCD modules 9.1 Handling Precautions 9.1.1The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. 9.1.2 If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 9.1.3 Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 9.1.4 The...

Open the catalog to page 16