Catalogs >
TAILOR PIXELS TECHNOLOGY CO., LTD. >
Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28)

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28)
29Pages

Catalog excerpts

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 1

Manufacturer Certificated Product Specification Model: TOX063TSWIG02 0.63″ PM OLED Display Module (120*28) This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com tailor@tailorpixels.com Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd

Open the catalog to page 1

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 2

TAILOR PIXELS TECHNOLOGY CO., LTD. Revised History Part Number

Open the catalog to page 2

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 3

TAILOR PIXELS TECHNOLOGY CO., LTD. Revision History Contents 1. Basic Specifications 1.1 1.2 1.3 1.4 1.5 Display Specifications Mechanical Specifications Active Area / Memory Mapping & Pixel Construction Mechanical Drawing Pin Definition 2. Absolute Maximum Ratings 3. Optics & Electrical Characteristics 3.1 Optics Characteristics 3.2 DC Characteristics 3.3 AC Characteristics 3.3.1 I2C Interface Characteristics 3.3.2 I2C Interface with Internal Charge Pump 3.3.3 I2C Interface with External VCC 4. Functional Specification 4.1 Commands 4.2 Power down and Power up Sequence 4.2.1 Power up...

Open the catalog to page 3

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 4

TAILOR PIXELS TECHNOLOGY CO., LTD. 1. Basic Specifications 1.1 Display Specifications 1) 2) 3) Display Mode: Display Color: Drive Duty: Passive Matrix Monochrome (White) 1/28 Duty Outline Drawing: Number of Pixels: Panel Size: Active Area: Pixel Pitch: Pixel Size: Weight: According to the annexed outline drawing 120  28 21.54  6.62  1.22 (mm) 15.58  3.62 (mm) 0.13  0.13 (mm) 0.11  0.11 (mm) TBD 1.3 Active Area / Memory Mapping & Pixel Construction Segment 68 Common 45 Common 18

Open the catalog to page 4

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 5

Customer Approval Signature Contact Side 1. Color: White 2. Driver IC: SSD1312 3. FPC Number: NFP1312-38 4. Interface: I2 C 5. General Tolerance: ±0.30 Contact Side Active Area 0.63" 120 x 28 Pixels C 2P Tolerance Dimension ±0.3 Angle ±1 General Roughness TOX063TSWIG02 Folding Type OEL Display Module Number: 120 x 28, Monochrome, COG Package Unless Otherwise Specified Drawing Number C2P C2N C1P C1N VBAT NC VSS VDD RES# SCL SDA IREF VCOMH VCC Soda Lime / Polyimide Original Drawing TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 5

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 6

TAILOR PIXELS TECHNOLOGY CO., LTD. 1.5 Pin Definition Pin Number Power Supply for Logic This is a voltage supply pin. It must be connected to external source. Ground of Logic Circuit This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground. Power Supply Power Supply for OEL Panel This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used. Driver Current Reference for Brightness...

Open the catalog to page 6

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 7

TAILOR PIXELS TECHNOLOGY CO., LTD. 2. Absolute Maximum Ratings Parameter Supply Voltage for Logic Supply Voltage for Display Supply Voltage for DC/DC （Internal DC/DC Enable） Operating Temperature Storage Temperature Note 1: All the above voltages are on the basis of “VSS = 0V”. Note 2: When this module is used beyond the above absolute maximum ratings, permanent breakage of the module may occur. Also, for normal operations, it is desirable to use this module under the conditions according to Section 3. “Optics & Electrical Characteristics”. If this module is used beyond these conditions,...

Open the catalog to page 7

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 8

TAILOR PIXELS TECHNOLOGY CO., LTD. 3. Optics & Electrical Characteristics 3.1 Optics Characteristics Characteristics Brightness (VCC Supplied Externally) Brightness (VCC Generated by Internal DC/DC) Dark Room Contrast Viewing Angle * Optical measurement taken at VDD = 2.8V, VCC = 8V. Software configuration follows Section 4.4 Initialization. 3.2 DC Characteristics Characteristics Supply Voltage for Logic Supply Voltage for Display (Supplied Externally) Supply Voltage for DC/DC Supply Voltage for Display (Generated by Internal DC/DC) Conditions Note 5 (Internal DC/DC Disable) High Level...

Open the catalog to page 8

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 9

TAILOR PIXELS TECHNOLOGY CO., LTD. 3.3 AC Characteristics 3.3. 1 I2C Interface Timing Characteristics: Symbol tcycle tHSTART Clock Cycle Time Start Condition Hold Time Data Hold Time (for “SDAOUT” Pin) Data Hold Time (for “SDAIN” Pin) Data Setup Time Start Condition Setup Time (Only relevant for a repeated Start condition) Stop Condition Setup Time Rise Time for Data and Clock Pin Fall Time for Data and Clock Pin Idle Time before a New Transmission can Start

Open the catalog to page 9

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 10

TAILOR PIXELS TECHNOLOGY CO., LTD. 3.3.2 I2C Interface with Internal Charge Pump 特别提醒(Special Tips):主板设计务必加电子开关, 否则, 可能引起漏电流现象 (When design main board, Please add Electronic Switch circuit, otherwise, will be caused leak current)

Open the catalog to page 10

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 11

TAILOR PIXELS TECHNOLOGY CO., LTD. 3.3.3 I2C Interface with External VCC 特别提醒(Special Tips):主板设计务必加电子开关, 否则, 可能引起漏电流现象 (When design main board, Please add Electronic Switch circuit, otherwise, will be caused leak current)

Open the catalog to page 11

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 12

TAILOR PIXELS TECHNOLOGY CO., LTD. 4. Functional Specification 4.1 Commands Refer to the Technical Manual for the SSD1312 4.2 Power down and Power up Sequence To protect OEL panel and extend the panel life time, the driver IC power up/down routine should include a delay period between high voltage and low voltage power sources during turn on/off. It gives the OEL panel enough time to complete the action of charge and discharge before/after the operation. 4.2.1 Power up Sequence: 1. 2. 3. 4. 5. 6. Power up VDD Send Display off command Initialization Clear Screen Power up VCC/ VBAT Delay...

Open the catalog to page 12

Product Specification Model:TOX063TSWIG02 0.63″ OLED Display Module (120*28) - 13

TAILOR PIXELS TECHNOLOGY CO., LTD. 4.4 Actual Application Example Command usage and explanation of an actual example 4.4.1 VCC Supplied Externally Set Entire Display On/Off 0xA4 Set Display Start Line 0x40 Clear Screen Power Stabilized (Delay Recommended) Set RES# as High (3μs Delay Minimum) Initialized State (Parameters as Default) Set COM Output Scan Direction 0xC8 Power up VCC & Stabilized (Delay Recommended) Set COM Pins Hardware Configuration 0xDA, 0x10 Initial Settings Configuration Set Display Clock Divide Ratio/Oscillator Frequency 0xD5, 0x41 Set VCOMH Deselect Level 0xDB, 0x30...

Open the catalog to page 13