Catalog excerpts
Manufacturer Certificated Product Specification Model: TBZ070C800480-01 7.0″ UART TFT Display Module (800*480) This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com tailor@tailorpixels.com Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd.
Open the catalog to page 1TAILOR PIXELS TECHNOLOGY CO., LTD. CHANGE HISTORY: Date Description First Release Person in Charge Tony
Open the catalog to page 2TAILOR PIXELS TECHNOLOGY CO., LTD. CONTENTS ■ GENERAL DESCRIPTION ■ LCM PARAMETER ■ ELECTRICAL CHARACTERISTICS ■ BACKLIGHT CHARACTERISTICS ■ BLOCK DIAGRAM ■ PIN DESCRIPTION ■ OUTLINE DIMENSION ■ OPTICAL SPECIFICATIONS ■ TFT LCM protocol table without master terminal ■ PR
Open the catalog to page 3TAILOR PIXELS TECHNOLOGY CO., LTD. ■ GENERAL DESCRIPTION TBZ070C800480-01 is a TFT dot matrix LCD module. It is composed of a PCBA, color TFT LCD panel, Source and Gate driver IC, FPC, CTP and a backlight unit. The module display area contains 800x480 pixels. This product accords with RoHS environmental criterion. Viewing Direction PCBA Dimension Touch Type G+G Capactive touch panel Backlight Type Backlight Luminance Input Voltage ■ ELECTRICAL CHARACTERISTICS Item Operating Voltage Operating Current Operating Temperature Storage Temperature Serial Baud Rate Serial Output Level Serial Input...
Open the catalog to page 4TAILOR PIXELS TECHNOLOGY CO., LTD. Flash Memory SRAM Memory ■ BACKLIGHT CHARACTERISTICS Condition: Constant Current Driving Method(If=20mA(+/-10%) Item Forward Voltage Luminance with
Open the catalog to page 5TAILOR PIXELS TECHNOLOGY CO., LTD. ■ PIN DESCRIPTION J2: UART(Used 8Pin 2mm Pitch Connector) Pin. No Power Supply UART transmit data output (3.3V TTL) UART receiving data input (3.3V TTL) J12: RTP(4PIN) Standard(NC) J10: TFT(50PIN) Standard Use J11: CTP(6PIN) Standard Use J6: SD Upgrade(Standard Use) Pin. No Command Response Data bit 2 Data bit 3/Card detection Wake-up input
Open the catalog to page 6TAILOR PIXELS TECHNOLOGY CO., LTD. J1: MCU Debug(3PIN) Standard(Not use) SP1: Audio Speaker Interface(2PIN) Standard(Not u
Open the catalog to page 7TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 8TAILOR PIXELS TECHNOLOGY CO., LTD. ■ OPTICAL SPECIFICATIONS Item Response time Contrast ratio Viewing angle range
Open the catalog to page 9TAILOR PIXELS TECHNOLOGY CO., LTD. ■ TFT LCM protocol table without master terminal
Open the catalog to page 10TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 11TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 12TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 13TAILOR PIXELS TECHNOLOGY CO., LTD. ■ PRECAUTIONS Handing Precautions (1) The display panel is made of glass and polarizer. As glass is fragile, it tends to become or chipped during handling especially on the edges. Please avoid dropping or jarring. Do not subject it to a mechanical shock by dropping it or impact. (2) If the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in your mouth. If the substance contacts your skin or clothes, wash it off using soap and water. (3) Do not apply excessive force to the display surface or the adjoining areas...
Open the catalog to page 14TAILOR PIXELS TECHNOLOGY CO., LTD. - Water - Ketone - Aromatic solvents Wipe off saliva or water drops immediately, contact with water over a long period of time may cause deformation or color fading. Avoid contacting oil and fats. (7) Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water droplets, moisture condensation or a current flow in a high-humidity environment. (8) Install the LCD Module by using the mounting holes. When mounting the LCD module make sure it is free of twisting, warping and distortion. In particular, do not forcibly...
Open the catalog to page 15TAILOR PIXELS TECHNOLOGY CO., LTD. (2). Storing in a polyethylene bag with the opening sealed so as not to enter fresh air outside in it . And with no desiccant. (3). Placing in a dark place where neither exposure to direct sunlight nor light’s keeping the storage temperature range. (4). Storing with no touch on polarizer surface by the anything else. Caution against static charge The LCD module use CMOS LSI drivers, so we recommended that you : Connect any unused input terminal to Vdd or Vss, do not input any signals before power is turned on, and ground your body, work/assembly areas,...
Open the catalog to page 16All TAILOR PIXELS TECHNOLOGY CO. catalogs and technical brochures
-
TFT LCD serial for Smart Life
11 Pages