Catalog excerpts
Manufacturer Certificated Product Specification Model: TBK050HD-01 5.0″(HDMI) Display Board This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com tailor@tailorpixels.com Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd.
Open the catalog to page 1TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 2TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 3TAILOR PIXELS TECHNOLOGY CO., LTD. Feature Size LCM Resolution supported Pixel Configuration Interface Connect type USB(CTP) Key Audio PCB (W x H x D) (mm) LCM connector CTP connector HDMI connector VGA connector Key connector Speaker connector 3. Electrical Characteristics Item Operating Temperature Storage Temperature Supply Voltage Direct LCM) Backlight Current
Open the catalog to page 4TAILOR PIXELS TECHNOLOGY CO., LTD. Description Power supply(5V) DataData+ No connected GND Signal TMDS Data 2+ TMDS Data2 Sh TMDS Data 2TMDS Data 1+ TMDS Data1 Sh TMDS Data 1TMDS Data 0+ TMDS Data 0 S TMDS Data 0TMDS Clock+ TMDS Clock Sh TMDS ClockCEC NC SCL SDA DDC/CEC GND +5V Hot Plug Detec Description TMDS Transition differential signal 2+ Data2 Shielding ground TMDS Transition differential signal 2TMDS Transition differential signal 1+ Data1 Shielding ground TMDS Transition differential signal 1TMDS Transition differential signal 0+ Data0 Shielding ground TMDS Transition differential...
Open the catalog to page 5TAILOR PIXELS TECHNOLOGY CO., LTD. Description I2C Clock input I2C Data input and output GROUND Video-blue Video-blue Video-green Video-green Video-red Video-red HSYNC VSYNC GROUND Description Right audio channel+ Right audio channelLeft audio channel+ Left audio channel- Description Power supply(12V) Ground Signal DOWN UP EXIT POWER MENU LED GND 3.3V Description Menu down key Menu up key Menu exit key Power on/off key Menu key Status indicator LED Ground Power supply for key PCB
Open the catalog to page 6TAILOR PIXELS TECHNOLOGY CO., LTD. Description Backlight LED Cathode Backlight LED Anode. Ground Power supply Data bus Data bus Data bus Ground HSYNC VSYNC NC GND XR(NC) YD(NC) XL(NC) YU(NC) Dot clock signal input. Latching input data at its rising edge. Normally pulled high. DISP=“1”: Normally operation (Default) DISP=“0”: Timing controller, source driver will turn off ,all output are High-Z. Horizontal sync input. Negative polarity. Vertical sync input. Negative polarity. Data enable input. Active high to enable the input data bus under “DE Mode.” No connect System Ground No connect No...
Open the catalog to page 7TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 8TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 9All TAILOR PIXELS TECHNOLOGY CO. catalogs and technical brochures
-
TFT LCD serial for Smart Life
11 Pages