Product Specification Model:TBK043MI-01 4.3″(MIPI) Display Board

Product catalog summary

General Specifications
The TBK043MI-01 is a 4.3-inch display module with a resolution of 800x480 pixels. It supports 16.2 million display colors and uses a DSI MIPI interface. The module's PCBA size is 105.50x83.94x1.6mm, and it includes connectors for LCM, CTP, and MIPI with specific pin configurations.

Electrical Characteristics
The module operates with a supply voltage (VDD) range of -0.5 to 3.96V and a direct current (Id) between 90 to 130mA. The backlight current is typically 40mA. It functions within an operating temperature range of -20 to 70°C and can be stored at temperatures between -30 to 80°C.

PIN-MAP
The document provides detailed pin configurations for MIPI, LCM, CTP, and backlight power supply. Key pins include ground (GND), power supply (VDD), data signals for MIPI, and I2C clock and data signals.

Block Diagram and Mechanical Drawing
The document includes a block diagram and mechanical drawing, which are essential for understanding the module's layout and integration into systems.

Catalog excerpts

Product Specification Model:TBK043MI-01 4.3″(MIPI) Display Board-1

TAILOR PIXELS TECHNOLOGY CO., LTD. Manufacturer Certificated Product Specification Model: TBK043MI-01 4.3″(MIPI) Display Board This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com [email protected] Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd.

Open the catalog to page 1

Product Specification Model:TBK043MI-01 4.3″(MIPI) Display Board-2

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 2

Product Specification Model:TBK043MI-01 4.3″(MIPI) Display Board-3

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 3

Product Specification Model:TBK043MI-01 4.3″(MIPI) Display Board-4

TAILOR PIXELS TECHNOLOGY CO., LTD. 2. General Specifications Feature Size LCM Resolution supported Interface Connect type Characteristics Display Colors PCBA size LCM connector CTP connector MIPI connector Supply Voltage Direct Current Backlight Current Operating Temperature Storage Temperature

Open the catalog to page 4

Product Specification Model:TBK043MI-01 4.3″(MIPI) Display Board-5

TAILOR PIXELS TECHNOLOGY CO., LTD. Symbol GND MP_DP1 MP_NP1 GND MP_DCN MP_DCP GND MP_DN0 MP_DP0 GND SCL0 SDA0 GND DC DC Description Ground MIPI Positive data1 signal(+) MIPI Negative data1 signal(-) Ground MIPI Positive clock signal(+) MIPI Positive clock signal(-) Ground MIPI Positive data0 signal(+) MIPI Negative data0 signal(-) Ground I2C0 clock signal I2C0 data signal Ground 3V3 3V3

Open the catalog to page 5

Product Specification Model:TBK043MI-01 4.3″(MIPI) Display Board-6

TAILOR PIXELS TECHNOLOGY CO., LTD. HSYNC VSYNC NC GND XR(NC) YD(NC) XL(NC) YU(NC) Description Backlight LED Cathode Backlight LED Anode. Ground Power supply Data bus Data bus Data bus Ground Dot clock signal input. Latching input data at its rising edge. Normally pulled high. DISP=“1”: Normally operation (Default) DISP=“0”: Timing controller, source driver will turn off ,all output are High-Z. Horizontal sync input. Negative polarity. Vertical sync input. Negative polarity. Data enable input. Active high to enable the input data bus under “DE Mode.” No connect System Ground No connect No connect...

Open the catalog to page 6