Product Specification Model:TBJ043VG-01 VGA/CVBS Display Board

Product catalog summary

General Specifications:
The TBJ043VG-01 is a VGA/CVBS display board with a 4.3-inch size and a resolution of 480x272 pixels. It uses an R.G.B.-Stripe pixel configuration and supports VGA/CVBS interfaces. The board connects via cable and includes a 5-key interface. The PCB dimensions are 90.6mm by 54.0mm.

Electrical Characteristics:
The module operates with a supply voltage (VDD) ranging from 9V to 14V, with a typical current (Idd) of 100mA. It functions within an operating temperature range of -10°C to 60°C and can be stored between -20°C and 70°C.

PIN-MAP:

CN2 (AV PIN 6PIN/2.0mm): Includes power supply, ground, and AV input signals.
CN4 (VGA PIN 12PIN/2.0mm): Contains power ground, VSYNC, HSYNC, and RGB signals, along with I2C data and clock inputs.
CN5 (Keyboard 8PIN/2.0mm): Features menu, increase/decrease keys, source/up, power, remote control, ground, and VCC.
CN3 (LCM PIN 50PIN/0.5mm): Provides connections for LED backlight, power ground, VCOM input, digital power supply, data enable, sync signals, RGB data inputs, sample clock, scanning direction, power for scan driver, reset, polarity select, and analog circuit power supply.

Block Diagram:
The document includes a block diagram illustrating the functional components and connections of the display board.

Mechanical Drawing:
A mechanical drawing is provided to detail the physical layout and dimensions of the board.

Catalog excerpts

Product Specification Model:TBJ043VG-01 VGA/CVBS Display Board-1

Manufacturer Certificated Product Specification Model: TBJ043VG-01 VGA/CVBS Display Board This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com [email protected] Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd.

Open the catalog to page 1

Product Specification Model:TBJ043VG-01 VGA/CVBS Display Board-2

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 2

Product Specification Model:TBJ043VG-01 VGA/CVBS Display Board-3

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 3

Product Specification Model:TBJ043VG-01 VGA/CVBS Display Board-4

TAILOR PIXELS TECHNOLOGY CO., LTD. Feature Size LCM Resolution supported Pixel Configuration Interface Connect type Key PCB (W x H ) LCM connector AV connector VGA connector 3. Electrical Characteristics Item Supply Voltage Direct Current Operating Temperature Storage Temperature

Open the catalog to page 4

Product Specification Model:TBJ043VG-01 VGA/CVBS Display Board-5

TAILOR PIXELS TECHNOLOGY CO., LTD. Power supply Function Power ground VSYNC signal HSYNC signal Power ground Red signal + Power ground Green signal + Power ground Blue signal + Power ground I2C data input I2C clock Function Menu Reduce key Increase key SOURCE/UP （POWER） Remote control GND

Open the catalog to page 5

Product Specification Model:TBJ043VG-01 VGA/CVBS Display Board-6

TAILOR PIXELS TECHNOLOGY CO., LTD. Function Power for LED backlight anode Power for LED backlight anode Power for LED backlight cathode Power for LED backlight cathode Power ground VCOM input Digital power supply(+3.3V) DE or HV mode control Data Enable Vsync signal input Hsync signal input Blue data input (MSB) Blue data input Blue data input Blue data input Blue data input Blue data input Blue data input Blue data input(LSB) Green data input(MSB) Green data input Green data input Green data input Green data input Green data input Green data input Green data input(LSB) Red data input(MSB) Red...

Open the catalog to page 6

Product Specification Model:TBJ043VG-01 VGA/CVBS Display Board-7

TAILOR PIXELS TECHNOLOGY CO., LTD. GND L/R U/D VGH VGL AVDD RESET POL VCOM NC NC NC NC Power ground Select left to right scanning direction Select up or down scanning direction Positive power for scan driver Negative power for scan driver Power supply for analog circuit Reset Polarity select for the line inversion control signal VCOM input No Connector No Connector No Connector No Connector

Open the catalog to page 7