Catalogs >
TAILOR PIXELS TECHNOLOGY CO., LTD. >
2.01 inch AMOLED Display, 240×296, QSPI

2.01 inch AMOLED Display, 240×296, QSPI
17Pages

Catalog excerpts

2.01 inch AMOLED Display, 240×296, QSPI - 1

Manufacturer Certificated Product Specification Model: TOH201XVT-01 2.01″AMOLED Display Module(240*296） This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com tailor@tailorpixels.com Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd

Open the catalog to page 1

2.01 inch AMOLED Display, 240×296, QSPI - 2

TAILOR PIXELS TECHNOLOGY CO., LTD. Records of Revision 修改记录 Rev

Open the catalog to page 2

2.01 inch AMOLED Display, 240×296, QSPI - 3

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 3

2.01 inch AMOLED Display, 240×296, QSPI - 4

TAILOR PIXELS TECHNOLOGY CO., LTD. General Description 规格简介 2.01 inch 240x296 is a color active matrix AMOLED module using Low Temperature Poly-silicon TFT’s (Thin Film Transistors) as active switching devices. This module has a 2.01 inch diagonally measured active area with 240x296 resolutions (240 horizontal by 296 vertical pixel arrays). Each pixel is divided into RED, GREEN, BLUE dots and this module can display 16.7M colors. 2.01 英寸 240x296 是一个彩色有源矩阵 AMOLED 模块，使用低温聚硅 TFT（薄膜晶体管）作为有源开关器件。该模块有一个 2.01 英寸的对角线测量的活动区域，分辨率为 240x296 （240 水平和 296 垂直像素数组）每个像素被分为红色、。绿色、蓝点，该模块可以显示 16.7M...

Open the catalog to page 4

2.01 inch AMOLED Display, 240×296, QSPI - 5

lailorpixels TAILOR PIXELS TECHNOLOGY CO., LTD. Specification: 1). Display mode: 2.01" 240*296 16.7M Colors AMOLED; 2). Viewing angle: L88/R88/T88/B88 (Min); 7 8 4). 1C: COG-SH8501 A(Display);BV6802(Power); 5). Interface: QSPI; 6). General Tolerance:±0.20. 7). Rohs Compliancy. 8). Recommended Case Open Area should be less than Module VA fpc motion QSPI TP PINgX TP_SCL TP_SDA TP_RST TP_INT TP_VCC GND

Open the catalog to page 5

2.01 inch AMOLED Display, 240×296, QSPI - 6

lailorpixels TAILOR PIXELS TECHNOLOGY CO., LTD. 6 Absolute Maximum Ratings VSS=0V, Ta=25°C Note 1: 90%RH max, If Ta is below 50°C; 60%RH max, If Ta is over 60°C.

Open the catalog to page 6

2.01 inch AMOLED Display, 240×296, QSPI - 7

TAILOR PIXELS TECHNOLOGY CO., LTD. Item 项目 Power supply 电力供应 Supply Voltage 电源电压 Analog 模拟 IO Input Voltage 输入电压 Storage temperature 储存温度 Symbol VDD IOVDD Vi Tstg Operating temperature 工作温度 Storage humidity 存储湿度 Operating humidity 操作湿度 Electrical Specification 电性规格 Powersupply 电力供应 Supply Voltage 电源电压 Analog IO Logic Low input voltage 输入电压低 Logic High input voltage 输入电压高 Logic Low outp

Open the catalog to page 7

2.01 inch AMOLED Display, 240×296, QSPI - 8

TAILOR PIXELS TECHNOLOGY CO., LTD. Optical Specifications 光学规格 9.1 Optical Specifications 光学规格 Backlight On (Transmissive Mode) surface( I f =20mA) 表面亮度 Contrast ratio 对比度 Response time 响应时间 Normally viewing angle 10000  X = Y =0º -

Open the catalog to page 8

2.01 inch AMOLED Display, 240×296, QSPI - 9

TAILOR PIXELS TECHNOLOGY CO., LTD. lailorpixels 9.2 The power on/off sequence is illustrated below 9.3 Definition of Contrast Ratio Contrast is measured perpendicular to display surface in reflective and transmissive mode. The measurement condition is: Measuring Equipment Measuring machine: LCD-5100 or EQUI 9.5 Definition of Color Appearance R,G,B and W are defined by (x, y) on the IE chromaticity diagram NTSC=area of RGB triangle/area of NTSC triangleX100% Measuring picture: Red, Green, Blue and White (Measuring machine: BM-7)

Open the catalog to page 9

2.01 inch AMOLED Display, 240×296, QSPI - 10

TAILOR PIXELS TECHNOLOGY CO., LTD. Definition of Surface Luminance, Uniformity and Transmittance 表面亮度、均匀性和透光率的定义 Using the transmissive mode measurement approach, measure the white screen luminance of the display panel and backlight. 9.6.1 Surface Luminance: LV = average (LP1:LP5) Uniformity = Minimal (LP1:LP5) / Maximal (LP1:LP5) * 100% Quality Assurance 质量标准 10.1 This standard for Quality Assurance assures the quality of LCD module products supplied to customer by Tailorpixels . 10.2 Agreement Items 协议项目 Tailorpixels and customer shall negotiate if the following situation occurs: 10.2.1...

Open the catalog to page 10

2.01 inch AMOLED Display, 240×296, QSPI - 11

lailorpixels TAILOR pixels technology CO., ltd. follows customer's viewing angle specifications. 10.3.1.3 Definition of area: A Zone: Active Area, B Zone: Viewing Area. lailorpixels TAILOR pixels technology CO., ltd. 10.3.2 Basic principle:A set of sample to indicate the limit of acceptable quality level must be discussed by both Tailorpixels and customer when there is any dispute happened. 10.4 Inspection Specification Sampling plan according to GB/T2828.1-2012/ISO 2859-1: 1999 and ANSI/ASQC Z1.4-1993,normal level 2 and based on: Major defect: AQL 0.4 Minor defect: AQL 1.0 Black / White...

Open the catalog to page 11

2.01 inch AMOLED Display, 240×296, QSPI - 12

lailorpixels TAILOR PIXELS TECHNOLOGY CO., LTD. Glass Crack (Minor defect) LCD with extensible crack line is unacceptable(When press the cracked LCD area, the line will expand, we define it is extensible crack line) Glass Chipping Pad Area: (Minor defect) Glass Chipping Rear of PadArea:(Minordefect ('hfgft) Glass Chipping Except Pad Area: (Minor defect)

Open the catalog to page 12

2.01 inch AMOLED Display, 240×296, QSPI - 13

lailorpixels TAILOR PIXELS TECHNOLOGY CO., LTD. Glass Corner Chipping: (Minor defect) M^:('J> MM) Glass burr don’t affect assemble and module dimension. FPC Defect: (Minor defect) FPC ^ ^:(^MM) 9.1 Dent, pinhole width a<w/3. (w: circuitry width.) 9.2 Open circuit is unacceptable. 9.3 No oxidation, contamination and distortion. Screen deformation # Test for insertion of plug gauge at highest warping point: (3.1-6.0inches) H = 0.3MM The client has special requirements,according to drawing Bubble on Polarizer (Minor defect) Dent on Polarizer (Minor defect) ±M^('J'MM)

Open the catalog to page 13

2.01 inch AMOLED Display, 240×296, QSPI - 14

loilorpixels TAILOR PIXELS TECHNOLOGY CO., LTD. Remark: Visual and cosmetic defects are rejectable only if these fall within the LCD viewing area.

Open the catalog to page 14

2.01 inch AMOLED Display, 240×296, QSPI - 15

TAILOR PIXELS TECHNOLOGY CO., LTD. Classification of Defects 缺陷的分类 Visual defects (Except no / wrong label) are treated as minor defect and electrical defect is Identification/marking criteria 识别/评分标准 Any unit with illegible / wrong /double or no marking/ label shall be rejected. Packing 包装 10.7.1 There should be no damage of the outside carton box, each packaging box should has label in the correct location per packing drawing requirement. 10.7.2 All direct package materials shall offer ESD protection. Reliability Specification 可靠性规范 Item Cycle Time Constant Temp. and Constant Humidity...

Open the catalog to page 15

2.01 inch AMOLED Display, 240×296, QSPI - 16

TAILOR PIXELS TECHNOLOGY CO., LTD. IDD should be within twice initial value. In case of malfunction defect caused by ESD damage, if it would be recovered to normal state after resetting, it would be judged as a good part. Note 4. Only upon request. Precautions and Warranty 注意事项和保证 12.1 12.1.1 The liquid crystal in the LCD is poisonous. Do not put it in your mouth. If the liquid crystal touches your skin or clothes, wash it off immediately using soap and water. 12.1.2 Since the liquid crystal cells are made of glass, do not apply strong impact on them. Handle with care. 12.2 12.2.1 Reverse...

Open the catalog to page 16