Catalogs >
TAILOR PIXELS TECHNOLOGY CO., LTD. >
1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI
17Pages

Catalog excerpts

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 1

Manufacturer Certificated Product Specification Model: TOH151XRT-01C 1.51″AMOLED Display Module(466*466) This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com tailor@tailorpixels.com Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd.

Open the catalog to page 1

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 2

TAILOR PIXELS TECHNOLOGY CO., LTD. Records of Revision 修改记录 Rev

Open the catalog to page 2

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 3

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 3

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 4

TAILOR PIXELS TECHNOLOGY CO., LTD. General Description 规格简介 1.51 inch 466x466 is a color active matrix AMOLED module using Low Temperature Poly-silicon TFT’s (Thin Film Transistors) as active switching devices. This module has a 1.51 inch diagonally measured active area with 466x466 resolutions (466 horizontal by 466 vertical pixel arrays). Each pixel is divided into RED, GREEN, BLUE dots and this module can display 16.7M colors. 1.51 英寸 466x466 是一个彩色有源矩阵 AMOLED 模块，使用低温聚硅 TFT（薄膜晶体管）作为有源开关器件。该模块有一个 1.51 英寸的对角线尺寸，分辨率为 466x466（466 水平和 466 垂直像素数组）。每个像素被分为红色、绿色、蓝点，该模块可以显示 16.7M 的颜色。 Module...

Open the catalog to page 4

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 5

lailorpixels TAILOR PIXELS TECHNOLOGY CO., LTD. OLED Note: 1. Display mode: 1.51' AMOLED 466*RGB*466; Viewing direction: FREE; 2. Interface Type: MIPI Interface; Input voltage: 2.8V; 3. OLED Driver IC: C05300; Power IC: BV6802ff;Touch IC: CST9217 4, Chromaticity White(X,Y): x=Q,30+0.03; y= 0.31+0.03; 5. NTSC: 100%(TYP); Contrast:10000(MIN); Uniformity: 85% MIN; 6. Operating temprature: -20° C ~ +70° C ; 7. Storage temprature: -30° C ~ +80° C ; BM28B0.6-24DP/2-0.35V 9. "( )” Reference dimension; “ * ” Control dimensions; 10. Unmarked dimensional tolerance: ±0.20 TP_RST TP_SCL TP_SDA

Open the catalog to page 5

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 6

lailorpixels TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 6

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 7

TAILOR PIXELS TECHNOLOGY CO., LTD. Note 1: 90%RH max, If Ta is below 50ºC; 60%RH max, If Ta is over 60ºC. Item 项目 Power supply 电力供应 Supply Voltage 电源电压 Analog 模拟 IO Input Voltage 输入电压 Storage temperature 储存温度 Symbol VDD IOVDD Vi Tstg Operating temperature 工作温度 Storage humidity 存储湿度 Operating humidity 操作湿度 Electrical Specification 电性规格 Powersupply 电力供应 Supply Voltage 电源电压 Analog IO Logic Low input voltage 输入电压低 Logic High input voltage 输入电压高 Logic Low output voltage 输出电压低 Logic High output voltage 输出电压高 Normal display Current Consumption 电正常的显示 Standby mode 流消耗待机模式 Frame Frequency 帧频

Open the catalog to page 7

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 8

TAILOR PIXELS TECHNOLOGY CO., LTD. Optical Specifications 光学规格 9.1 Optical Specifications 光学规格 Backlight On (Transmissive Mode) surface( I f =20mA) 表面亮度 Contrast ratio 对比度 Response time 响应时间 Normally viewing angle 10000  X = Y =0º -

Open the catalog to page 8

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 9

TAILOR PIXELS TECHNOLOGY CO., LTD. The power on/off sequence is illustrated below 电源启动/关闭顺序 Definition of Contrast Ratio 对比度的定义 Contrast is measured perpendicular to display surface in reflective and transmissive mode. The measurement condition is: Measuring Equipment 测量设备 Measuring Point Diameter 测点直径 Measuring Point Location 测点位置 Active Area centre point A: All Pixels white B: All Pixel black Maximum Test pattern 测试模式 Contrast setting Definitions: CR (Contrast) = Luminance of White Pixel / Luminance of Black Pixel 9.4 Definition of Viewing Angles Measuring machine: LCD-5100 or EQUI 9.5...

Open the catalog to page 9

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 10

TAILOR PIXELS TECHNOLOGY CO., LTD. Definition of Surface Luminance, Uniformity and Transmittance 表面亮度、均匀性和透光率的定义 Using the transmissive mode measurement approach, measure the white screen luminance of the display panel and backlight. 9.6.1 Surface Luminance: LV = average (LP1:LP5) Uniformity = Minimal (LP1:LP5) / Maximal (LP1:LP5) * 100% Quality Assurance 质量标准 10.1 This standard for Quality Assurance assures the quality of LCD module products supplied to customer by Tailorpixels . 10.2 Agreement Items 协议项目 Tailorpixels and customer shall negotiate if the following situation occurs: 10.2.1...

Open the catalog to page 10

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 11

lailorpixels TAILOR pixels technology CO., ltd. follows customer's viewing angle specifications. 10.3.1.3 Definition of area: A Zone: Active Area, B Zone: Viewing Area. lailorpixels TAILOR pixels technology CO., ltd. 10.3.2 Basic principle:A set of sample to indicate the limit of acceptable quality level must be discussed by both Tailorpixels and customer when there is any dispute happened. 10.4 Inspection Specification Sampling plan according to GB/T2828.1-2012/ISO 2859-1: 1999 and ANSI/ASQC Z1.4-1993,normal level 2 and based on: Major defect: AQL 0.4 Minor defect: AQL 1.0 Black / White...

Open the catalog to page 11

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 12

lailorpixels TAILOR PIXELS TECHNOLOGY CO., LTD. Glass Crack (Minor defect) LCD with extensible crack line is unacceptable(When press the cracked LCD area, the line will expand, we define it is extensible crack line) Glass Chipping Pad Area: (Minor defect) Glass Chipping Rear of PadArea:(Minordefect ('hfgft) Glass Chipping Except Pad Area: (Minor defect)

Open the catalog to page 12

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 13

lailorpixels TAILOR PIXELS TECHNOLOGY CO., LTD. Glass Corner Chipping: (Minor defect) M^:('J> MM) Glass burr don’t affect assemble and module dimension. FPC Defect: (Minor defect) FPC ^ ^:(^MM) 9.1 Dent, pinhole width a<w/3. (w: circuitry width.) 9.2 Open circuit is unacceptable. 9.3 No oxidation, contamination and distortion. Screen deformation # Test for insertion of plug gauge at highest warping point: (3.1-6.0inches) H = 0.3MM The client has special requirements,according to drawing Bubble on Polarizer (Minor defect) Dent on Polarizer (Minor defect) ±M^('J'MM)

Open the catalog to page 13

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 14

loilorpixels TAILOR PIXELS TECHNOLOGY CO., LTD. Remark: Visual and cosmetic defects are rejectable only if these fall within the LCD viewing area.

Open the catalog to page 14

1.51-inch AMOLED, Round, With Touch Screen, 466×466, MIPI - 15

TAILOR PIXELS TECHNOLOGY CO., LTD. Classification of Defects 缺陷的分类 Visual defects (Except no / wrong label) are treated as minor defect and electrical defect is Identification/marking criteria 识别/评分标准 Any unit with illegible / wrong /double or no marking/ label shall be rejected. Packing 包装 10.7.1 There should be no damage of the outside carton box, each packaging box should has label in the correct location per packing drawing requirement. 10.7.2 All direct package materials shall offer ESD protection. Reliability Specification 可靠性规范 Item Cycle Time Constant Temp. and Constant Humidity...

Open the catalog to page 15