Catalog excerpts
Anti-vibration Solutions Type Rubber Coated SF Insulator ・Ideal for low frequency and micro vibration due to a resoncance point that ・is designed to be set particularly low. ・Wide selection to choose from: 100 kg (220.5 lb) to 300 kg (661.4 lb). ・Easy selection of best insulator for any application based on load (weight). ・All published data is based on 4 points of support (usage). Optimum Load (kg/4 points) Resonance Resonance Point (Hz) Magnification (dB) Upper bolt & bottom plate metal parts can be chosen between 1) and 2): 1) Iron with trivalent chromate plating 2) SUS 304 ※ For applications where a bottom plate is prefereable and a heavy load is present ※Particularly good for outdoor use due to bellows-type EPDM rubber wrapping Alpha Gel for reinforced durability. ※Stable performance in the -20° (-4° to 90° (194° range. C F) C F) Damping Characteristics Ideal for low frequency and micro vibration due to a resoncance point that is designed to be set particularly low. Load: 24㎏ / 4points Vibration level: 0.2G Resonance: 11.0Hz Resonance magnification: 14.2dB Isolator used: MN-7 Compression Set Even after prolonged compression, returns to its original state. ※Measurement (JIS K 6262) ①Compress by 25% and maintain for 22 hours at 70℃. ②Release compression and measure after 30 minutes at normal temperature.
Open the catalog to page 1All Taica Corporation catalogs and technical brochures
-
Gel Bush S Leaflet
1 Pages
-
Theta-Insulator Leaflet
1 Pages
-
SF-Insulator Leaflet
1 Pages
-
MN-Insulator Leaflet
1 Pages
-
BG-Insulator Leaflet
1 Pages
-
Company Brochure
4 Pages
-
CIPG
2 Pages
-
UV Curing Silicone Gel
2 Pages
-
Alpha GEL Products Catalog
8 Pages
-
OPTAlphaGEL Catalog
3 Pages
-
Alpha GEL TIM COH-1706
1 Pages