•Designed to damp tiny-to-light-load and micro vibration. •Effective for minimizing horizontal drift, using a bolt running through the Gel Bush. • Along with their shock absorbing capability, Gel Bushs are ideal for light and fragile objects including PCBs (printed circuit boards). • Available for loads from 0.2 kg (0.44 lb) to 32 kg (70.55 lb) with 4 points of support. CXgel Gel Bush Application Sketch Notes on Usage •Tighten the bolt all the way to the collar. •Usable bolts are M3 or smaller for type A, M4 or smaller for type B, and M3 or smaller for type S. •Use a washer equal to or bigger than the diameter of the upper portion of GEL bush. Taica CXgel is a trademark of Taica Corporation, registered in Japan an