Excellent Cushioning and Vibration Damping Performance ‘s softness allows for deflection required for shock absorption and vibration damping performance. Superior Durability is highly resistant to ozone, UV rays and chmicals, making it possible to use in a variety of locations. In addition, its performance is maintained even after repeated compression. Stable Performance Even In a Harsh Environment ‘s properties show little change in the -40℃ (-40 F) 200℃ (392 F) range, providing stable performance. Extremely High Safety ‘s composition makes it harmless to the human body and to the environment,...

Features of vibration damping with Applicable for light loads can be adjusted in its softness to ensure enough material deformation, that even the lightest of loads can be efficiently protected from vibration. Wide frequency range With a wealth of experience in vibration isolation accumulated over decades, Taica offers a variety of vibration damping products covering a wide range of frequencies. Long-term stability and durability Due to its remarkable resistance to ozone, UV and various chemicals, can be used in almost any environment. A very low compression set ensures stability and durability...

Type Theta Bolt material: Iron with trivalent chromate plating Bolt material: Brass Spring material: SWPA with trivalent chromate plating

Rubber coated Type SF Resonance Resonance Recommended Point (Hz) Magnification (dB) Frequency (Hz) Upper bolt material: Iron with trivalent chromate plating Bottom plate material: SUS304 Rubber coated Type SF Upper bolt & bottom plate metal parts can be chosen between 1) and 2): 1) Iron with trivalent chromate plating 2) SUS304 For applications where a bottom plate is prefereable and a heavy load is present ^•Particularly good for outdoor use due to bellows-type EPDM rubber wrapping Alpha Gel for reinforced durability. ^•Stable performance in the -20° (-4°) to 90° (194°) range. Optimum Load...

installed surface ※The height of the insulator may vary as the gel is compressed under load. ※The direction of the slot on the head of the stud is not controlled. ※Do not remove the gel burr around the edge of metal. This could cause detachment of gel from metal. Gel-bush Installation on a PCB applied in 4 locations for equal load distribution Vibration sensitive chips without lead feet Terminology Optimum Load Each of our vibration damping products is designed to work best for a certain range of weight (optimum load). Select the best one based on the load of the vibrating object. Optimum load...

GEL Tape & GEL Chip GEL Tape GEL Chip Item ^This product's size is customizable. ^Each item is delivered in min. 25 pcs/sheet Before use, remove dust from the object. Attach with even pressure after removing the separation liner paper. Apply sufficient pressure to securely attach PSA (pressure-sensitive adhesive) Powder is applied to the surface of GEL * Wide selection to choose from based on width and thickness * Very easy and effective solution for shock absorption and vibration damping where no space is allowed for insulators or bushes (adhesive on one side) * Wide temperature range from -40°C...

http://www.taica.co.jp/gel-english/ Taica Corporation Head office Takanawa Sengakuji-ekimae Bldg. 3F, 2-18-10Takanawa, Minato-ku, Tokyo 108-0074 Japan Phone. +81 -3-6367-6624 FAX. +81 -3-6367-6620 QlGEL is a trademark of Taica Corporation, registered in Japan and / or other countries.