Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. TADANO FAUN
  3. HK 40
video corpo

HK 40

HK 40
1 / 28 PagesView full catalog

HK 40

Product catalog summary
Overview: The HK 40 crane is designed with a maximum lifting capacity of 40 tons and complies with EUROMOT 3A standards. It offers various configurations based on the chassis and additional equipment.
Dimensions: The crane's dimensions depend on the chassis, with a typical length of 6380 mm and width of 2418 mm. Height and other dimensions vary with specific configurations.
Weights and Speeds: The crane's total weight ranges from 26.0 to 32.0 tons, influenced by chassis and options like counterweights and boom extensions. It provides infinitely variable speeds with a maximum single line pull of 33 kN.
Lifting Capacities: Lifting capacities change with boom length and angle. At 10.5 m, it can lift up to 40 tons, while at 35.2 m, the capacity decreases. Additional equipment can modify these capacities.
Lifting Heights: The crane can reach lifting heights up to 35.2 meters, depending on boom configuration and additional equipment.
Counterweight Configurations: Various counterweight configurations from 0.7 tons to 8.5 tons are available to enhance stability and lifting capacity.
Chassis and Equipment: The crane can be mounted on 3 or 4-axle chassis from manufacturers like Mercedes-Benz, MAN, DAF, Iveco, Volvo, and Scania. The main frame is a robust steel construction for high strength and durability.
Specifications: Detailed specifications include chassis, main frame, outriggers, superstructure engine, hydraulic system, controls, telescopic boom, derricking system, main winch, slewing system, counterweight, superstructure cab, electrical system, and safety devices.
Chassis and Main Frame: The crane is compatible with 3 or 4 axle chassis from major manufacturers. The main frame is torsion-resistant steel.
Outriggers: Features hydraulically extendable 4-point outriggers with specific base dimensions. Controls are accessible from both sides of the carrier and the superstructure cab.
Superstructure Engine: Powered by a Mercedes-Benz 4-cylinder diesel engine, model OM 904 LA, with 88 kW output and 470 Nm torque. It is water-cooled with a 150-liter fuel tank.
Hydraulic System: Utilizes a three-circuit diesel hydraulic system with a power-controlled axial piston double pump and a double gear pump, including an oil cooler.
Controls: Hydraulic controls with two joystick levers allow simultaneous and independent operation of four crane motions.
Telescopic Boom: Comprises four sections of high tensile steel, extendable from 10.45 m to 35.20 m, with a boom head featuring five sheaves.
Derricking and Main Winch: The derricking system uses a double-acting hydraulic cylinder with an integral brake. The main winch has an axial piston motor with planetary reduction and a spring-loaded multiple disc brake.
Slewing System: Includes an axial piston motor with a three-stage planetary reduction, offering variable speed from 0 to 2 min-1.
Counterweight and Cab: Standard counterweight is 4.5 t, divisible and controlled from the cab. The cab is spacious with safety glass windows and complete controls.
Electrical System and Safety Devices: Operates on 24 V DC with two batteries. Safety devices include a load moment device, hoist limit switch, and safety valves against pipe and hose rupture.
Optional Equipment: Options include a 9 m boom extension, additional counterweight, swivel hook, and special painting.
Load Charts and Remarks: Lifting capacities adhere to DIN, ISO, and EN standards. Maximum permissible wind speed is 15 m/sec. The document advises consulting the operator's manual before operation and notes that specifications may change without notice.
See more

Catalog excerpts

HK 40-1

Technical Data · metric

 Open the catalog to page 1
HK 40-2

* Angaben vom Fahrgestell abhängig * Data depending on chassis Änderungen vorbehalten / Subject to change without prior not

 Open the catalog to page 2
HK 40-3

Gewichte / Geschwindigkeiten Weights / Working speeds Anderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 3
HK 40-4

Hubhöhen Lifting heights * Nach hinten / * Over rear ** Mit Zusatzhubausrüstung / ** With additional lifting equ

 Open the catalog to page 4
HK 40-5

* Nach hinten / * Over rear ** Mit Zusatzhubausrustung / ** With additional lifting equipment Anderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 5
HK 40-6

M TADANO Hubhohen Lifting heights Nach hinten / 1Over rear

 Open the catalog to page 6
HK 40-7

* Nach hinten / * Over rear ** Mit Zusatzhubausrustung / ** With additional lifting equipment Anderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 7
HK 40-8

Hubhöhen Lifting heights * Nach hinten / * Over rear ** Mit Zusatzhubausrüstung / ** With additional lifting equ

 Open the catalog to page 8
HK 40-9

* Nach hinten / * Over rear ** Mit Zusatzhubausrustung / ** With additional lifting equipment Anderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 9
HK 40-10

Hubhöhen Lifting heights * Mit Zusatzhubausrüstung / * With additional lifting equ

 Open the catalog to page 10
HK 40-11

* Mit Zusatzhubausrustung / * With additional lifting equipment Anderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 11
HK 40-12

Hubhöhen Lifting heights * Mit Zusatzhubausrüstung / * With additional lifting equ

 Open the catalog to page 12
HK 40-13

* Mit Zusatzhubausrustung / * With additional lifting equipment Anderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 13
HK 40-14

Hubhöhen Lifting heights * Mit Zusatzhubausrüstung / * With additional lifting equ

 Open the catalog to page 14
HK 40-15

* Mit Zusatzhubausrustung / * With additional lifting equipment Anderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 15
HK 40-16

Hubhöhen Lifting heights

 Open the catalog to page 16
HK 40-17

Anderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 17
HK 40-18

Hubhöhen Lifting heights

 Open the catalog to page 18
HK 40-19

Anderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 19
HK 40-20

Hubhöhen Lifting heights

 Open the catalog to page 20
HK 40-21

Anderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 21
HK 40-22

Gegengewichtvarianten Counterweight versions Gegengewicht / Counterweight Änderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 22
HK 40-23

Anderungen vorbehalten / Subject to change without prior notice

 Open the catalog to page 23
HK 40-24

Fahrgestell 3 oder 4-achsiges handelsübliches Fahrgestell der Hersteller Mercedes-Benz, MAN, DAF, Iveco, Volvo und Scania. Andere Fahrgestelle auf Anfrage. Hauptrahmen Verwindungs- und biegesteife Stahlkonstruktion aus hochfestem Feinkornstahl in Kastenbauweise mit Zwischenrahmen zur Befestigung am Trägerfahrzeug. Abstützung Hydraulische, teleskopierbare 4-Punkt-Abstützung vorne schwenkbar, Bedienungsmöglichkeiten an beiden Seiten des Fahrgestelles und in der Oberwagenkabine. Abstützbasis 6,31 m x 6,49 m und 4,90 m x 6,20 m. Oberwagenrahmen Verwindungsteife Schweißkonstruktion mit einer außenverzahnten,...

 Open the catalog to page 24
HK 40-25

M TADANO Chassis 3 or 4 axle Mercedes-Benz, MAN, DAF, Iveco, Main frame Torsion-resistant, steel construction made from Volvo or Scania chassis. high strength, fine-grained steel. Specially designed for Other chassis on request. the ^e of chassis selected. Outriggers Hydraulically extendable 4 point outriggers front slewable with controls on both sides of carrier and in superstructure cab. Outrigger base 6.31 m x 6.49 m and 4.90 m x 6.20 m. Frame Torsion-resistant all-welded structure with a single-row ball slewing ring with external gearing for 360° continuous rotation. Superstructure...

 Open the catalog to page 25
HK 40-26

Siehe Seite 24 As on Page 25 Achsen / Anzahl Axles / Number Rader / GroBe Tyres / Size Wippwerk Derricking system Achslast Axle load Teleskopieren Boom telescoping Unterflasche / Hakengeschirr Hook block / Swivel hook Teleskopausleger Telescopic boom V+ Geschwindigkeiten Unterwagen Carrier speeds Abstutzung Outriggers Getriebe / Gang Transmission / Gear Steigfahigkeit Gradeability Ausladung Radius Auslegerverlangerung Boom extension Ausladung Radius Geschwindigkeiten Oberwagen Superstructure speeds Hubwerk Main winch Gegengewichtvarianten Counterweight versions Drehwerk Slewing system Unterwagen...

 Open the catalog to page 26
HK 40-28

TADANOyour dreams TADANO FAUN GmbH Faunberg 2, 91207 Lauf a. d. Pegnitz, Germany Phone: +49-9123-185-0 Fax: +49-9123-3085 http://www.tadanofaun.de E-mail: [email protected] TADANO LTD. (International Division) 4-12, Kamezawa 2-chome, Sumida-ku Tokyo 130-0014, Japan Phone: 81-3-3621-7750 Fax: 81-3-3621-7785 http://www.tadano.com E-mail: [email protected] 01/2016-01/2.0/GDC Printed in Germany

 Open the catalog to page 28

All TADANO FAUN catalogs and technical brochures

  1. tadano_AC3045-1-City_datasheet
    tadano_AC3045-1-City_datasheet

    52  Pages

  2. tadano_GR700EX-4_datasheet
    tadano_GR700EX-4_datasheet

    44  Pages

  3. CC 24.400-1
    CC 24.400-1

    92  Pages

  4. doc_tadano_GTC350_datasheet_imperial_en
    doc_tadano_GTC350_datasheet_imperial_en

    28  Pages

  5. AC 2.040-1
    AC 2.040-1

    52  Pages

Archived catalogs

  1. HK 65
    HK 65

    18  Pages

  2. GMK 3050
    GMK 3050

    1  Page

  3. AC 100
    AC 100

    1  Page

  4. AC 120-1
    AC 120-1

    1  Page

  5. ATF 70G-4
    ATF 70G-4

    24  Pages

  6. ATF 220G-5 EM 4
    ATF 220G-5 EM 4

    48  Pages

  7. Boom extension HTLJ
    Boom extension HTLJ

    2  Pages

  8. ATF 600G-8
    ATF 600G-8

    54  Pages

  9. ATF 220G-5
    ATF 220G-5

    58  Pages

  10. ATF 180G-5
    ATF 180G-5

    32  Pages

  11. ATF 130G-5
    ATF 130G-5

    30  Pages

  12. HK 70 Tadano Faun
    HK 70 Tadano Faun

    16  Pages

  13. ATF 90G-4
    ATF 90G-4

    38  Pages

  14. ATF 100G-4
    ATF 100G-4

    28  Pages

  15. RTF 40-3
    RTF 40-3

    1  Page

  16. LTM 1040/1
    LTM 1040/1

    1  Page

  17. GTC-800, GTC-600
    GTC-800, GTC-600

    7  Pages

  18. GMK 2035
    GMK 2035

    1  Page

  19. ATF 80-4
    ATF 80-4

    1  Page

  20. ATF 160G-5
    ATF 160G-5

    1  Page

  21. ATF 40G-2
    ATF 40G-2

    20  Pages

  22. ATF 60G-3
    ATF 60G-3

    44  Pages

  23. ATF 50G-3
    ATF 50G-3

    26  Pages

  24. ATF-220-5.1
    ATF-220-5.1

    66  Pages

  25. ATF 400G-6
    ATF 400G-6

    108  Pages

  26. ATF 200G-5
    ATF 200G-5

    58  Pages

  27. Lift Adjuster
    Lift Adjuster

    4  Pages

  28. AC 4.070-2
    AC 4.070-2

    56  Pages

  29. AC 100
    AC 100

    1  Page

  30. CC 28.600-2
    CC 28.600-2

    124  Pages

  31. GTC-350
    GTC-350

    16  Pages

  32. ATF 110G-5
    ATF 110G-5

    50  Pages

  33. GR-1600XL
    GR-1600XL

    24  Pages

  34. HK 70_2016
    HK 70_2016

    20  Pages

  35. HK 70_2013
    HK 70_2013

    16  Pages

  36. HK 60
    HK 60

    10  Pages

  37. GTC-700EX
    GTC-700EX

    16  Pages

  38. GR-700EXL
    GR-700EXL

    20  Pages

  39. GR-550EX
    GR-550EX

    20  Pages

  40. GR-300EX
    GR-300EX

    2  Pages

  41. All Terrain Cranes
    All Terrain Cranes

    20  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.