Catalogs >
TADANO FAUN >
GTC-350

GTC-350
16Pages

Catalog excerpts

TECHNICAL DATA | METRIC

GENERAL DATA CRANE CAPACITY BOOM COUNTERWEIGHT 1 piece integrated counterweight design • Fixed Configuration = 5670 kg WINCHES Planetary geared one-speed winch includes a hydraulic motor, multidisc internal brake and counterbalance valve. Drum rotation indicator is included (complete winch performance specs on Page 4) • Main Winch o Rope Diameter and Length: 16 mm x 152 m o Single line pull: 59.2 kN (first layer) o Single line speed: 78.1 m/min (fourth layer) DIMENSION Overall Length Overall Width (tracks extended) Overall Width (tracks retracted) Overall Height (working) MASS Gross Vehicle...

Open the catalog to page 2

FRAME The frame is an all-steel, welded structure, precision machined to accept attachment of the boom and swing components. HYDRAULIC SYSTEM • Hydraulic Pumps: One high pressure, variable axial piston pump with load sense and power limiting control for crane functions. One gear pump for cooling function • Directional Valves: Multiple pressure and flow compensated valves with integrated relief valves controlled by electrical signals • Pump output: 418 l/min @ 2200 rpm engine speed. 345 bar maximum pressure • Reservoir: 450 liter capacity, filler/breather, sight gauge, cleanout and sump...

Open the catalog to page 3

MAIN WINCH AND AUXILIARY WINCH PERFORMANCE Wire Rope: 16 mm diameter rotation resistant. Line pulls are not based on wire rope strength. Rope Layer Maximum Line Pull (kN) Line Speed (m/min) MACHINE WEIGHTS Standard Crane with 3 section - 27.2 m boom, full counterweight, 1 winch with wire rope and 750 mm 3-bar semi grouser track shoes OPTIONAL EQUIPMENT Extendable jib - 7.2 m to 12.8 m Auxiliary Nose Sheave Auxiliary Winch with 91.4 m wire rope 35 t hook block - four sheave 4 t Overhaul Ball Auger Ready Package Complete Auger Package

Open the catalog to page 4

WORKING RANGE

Open the catalog to page 6

LOAD CHARTS MAIN BOOM WITH TRACKS FULLY EXTENDED - 360° UP TO 1.5° SLOPE 5.7 t COUNTERWEIGHT Radius (m) MAIN BOOM LENGTH (m) 23.1

Open the catalog to page 7

LOAD CHARTS MAIN BOOM WITH TRACKS FULLY EXTENDED - 360° UP TO 4° SLOPE 5.7 t COUNTERWEIGHT Radius (m) MAIN BOOM LENGTH (m) 23.1

Open the catalog to page 8

LOAD CHARTS MAIN BOOM WITH TRACKS FULLY RETRACTED - OVER FRONT/REAR UP TO 1.5° SLOPE 5.7 t COUNTERWEIGHT Radius (m) MAIN BOOM LENGTH (m) 23.1

Open the catalog to page 9

LOAD CHARTS MAIN BOOM WITH TRACKS FULLY RETRACTED - OVER SIDE UP TO 1.5° SLOPE 5.7 t COUNTERWEIGHT Radius (m) MAIN BOOM LENGTH (m) 23.1

Open the catalog to page 10

LOAD CHARTS 7.2 m JIB WITH TRACKS FULLY EXTENDED - 360° 5.7 t COUNTERWEIGHT MAIN BOOM LENGTH (m)

Open the catalog to page 11

LOAD CHARTS 12.8 m JIB WITH TRACKS FULLY EXTENDED - 360° 5.7 t COUNTERWEIGHT MAIN BOOM LENGTH (m)

Open the catalog to page 12

PLEASE READ, UNDERSTAND, AND FOLLOW THE MANUALS FURNISHED WITH THE CRANE AS WELL AS THE CAPACITY LIMITATIONS AND GENERAL CONDITIONS LISTED BELOW PRIOR TO OPERATION OF THE CRANE. FAILURE TO DO SO MAY RESULT IN AN ACCIDENT. Performance of this TADANO crane as manufactured by Tadano Mantis Corporation applies only to machines as originally equipped by the manufacturer and in a properly maintained condition. Capacities given are maximum covered by the manufacturer’s warranty and are based on a freely suspended load with NO allowance for factors as out-of-level operation (beyond the limits...

Open the catalog to page 14

info@tadano.com www.tadano.com Tadano Europe Holdings GmbH Dinglerstraße 24, 66482 Zweibrücken, Germany Phone + 49 6332 830 Tadano Ltd. (International Division) 2-1, Kanda Nishikicho 2 Chome, Chiyoda City, 101-0054 Tokyo, Japan Phone: +81-3-3621-7

Open the catalog to page 16