TECHNICAL DATA | IMPERIAL Suitable for alternative fuels

February 2025. Unless otherwise specified, all information in this brochure refers to a standard crane equipment, and it is intended as general information only. No liability is assumed. Errors reserved. Product specifications and prices are subject to changes without notice. The photographs and/or drawings in this brochure are for illustrative purposes only. For correct and safe crane operation, the original operating manual and lifting capacity charts are essential. Failure to follow the corresponding Operator’s Manual when using our equipment or failure to otherwise act responsibly may result...

Main boom Rope length Carbody counterweight Hook block Overall width Roll / list angle Total weight Hook block Assembly weight Wire rope layer Overhaul ball Total wire rope Travel speed Winch layer diameter Working speeds

89.2‘ full power boom; 23.6‘ to 42’ jib Lifting capacities up to 4° out of level with full pick and carry Jib capacities to 0.5° out of level Dual hook operation with auxiliary nose sheave or jib Powerful winches with 16 mm diameter rope Tethered remote control for all rigging operations standard Full crane operation remote optional Best in class gradeability at 74 %

Specifications Vehicle dimensions Aux. Winch 9' 8" Main Winch 7' 4"

Vehicle dimensions General dimensions Overall width (tracks extended) 15' 1” Overall width (tracks retracted) 10' 1” Overall height (working) 8' 2”

TECHNICAL DATA FOR TRANSPORTATION

Transport dimensions Machine weights Standard equipment package Standard Crane with 3 section – 89‘ 3“ boom, 12,500 lb counterweight, 1 winch with wire rope, bi-fold jib and 29.5 inch 3-bar semi grouser track shoes Optional Equipment Extendable jib: 23‘ 6“ to 42‘ 1,390 lb Auxiliary nose sheave Auxiliary winch with 300‘ wire rope Auger ready package Complete auger package

TECHNICAL DATA FOR OPERATION

Main winch and auxiliary winch performance Wire Rope: 16 mm diameter rotation resistant. Line pulls are not based on wire rope strength.

CoOOCvJLOOLOOLOOLOOLO CVJLOOLOOLOOLOOLOOLOOLOO

EJ Tracks fully extended - 360° - Up to 0.5° slope - Extendable jib = 12,500 lb 15’9’’ Load chart data is for reference, load charts supplied in the crane cab shall be used for lift planning.

EJ Tracks fully extended - 360° - Up to 0.5° slope - Extendable jib 12 Load chart data is for reference, load charts supplied in the crane cab shall be used for lift planning.

Shaded area is allowable operating range! Limits of operation: Max. load capacity = 750 lb · Max. radius when mounted on main boom = 50 ft · Max. occupancy = 2 persons Notes: 1. It is permissible to leave the jibs stowed on the boom while operating with work platform mounted to the main boom. 2. The hook block(s) must be removed when using the work platform. WARNING: Lifting a load during work platform operation is not allowed. WARNING: Travelling the crane with person(s) in the work platform is not allowed.

Operation WP750 Work platform Shaded area is allowable operating range! Limits of operation: Maximum load capacity = 750 lb under “Limits of operation” · Max. occupancy = 2 persons Notes: 1. The hook block(s) must be removed when using the work platform. WARNING: Lifting a load during work platform operation is not allowed. WARNING: Travelling the crane with person(s) in the work platform is not allowed.

• Load capacity values in these charts are stated in lb x 1000. • All ratings are for 360° of rotation unless otherwise specified on the chart. • Load radius is defined as the horizontal distance from the axis of rotation (with no load) to the center of the lifting device after load is applied in feet (ft). • Boom height dimensions are measured from ground to center of lower boom head sheave in feet (ft). • Boom angle / boom length relationships given are an approximation of the resulting load radius, which should be an accurate measurement. • Boom angle is the included angle between the longitudinal...

TECHNICAL DESCRIPTION

Technical Description Crane specifications Boom 3-section full power telescoping boom. System consists of one double acting hydraulic cylinder with load holding valves and extension and retraction cables. Retracted length: 35’ 10” Extended length: 89’ 3” Extension time: 82 s Elevating angles: -1.5° to 80.0° Elevating time: 56 s Max. lifting height: 86’ 9” Boom head: Five cast nylon and one steel 14.7 inch diameter main sheaves on heavy-duty roller bearings. Auxiliary boom head Quick reeve, single 14.7 inch diameter high-strength, cast sheave mounted on a heavy-duty roller bearing. Allows single...

Technical Description Crane specifications Engine Make /Model: Cummins QSB4.5 · Type: 4 cylinder, water cooled, 4 cycle · Aspiration: turbocharged and aftercooled · Max. output: 173 HP (129 kW)@2200 rpm · Max. torque: 520 lb-ft (705 Nm)@1500 rpm · Piston disp: 4.5 l · Emission Cert: U.S. EPA Tier 4f, Euromot Stage V. Electrical system Fuel system Capacity: 75 gallons. Filtration: Inline fuel/water separator and engine mounted fuel filter. Side frames Two welded steel side frames are paired with a track group. The side frames extend and retract hydraulically and are controlled from the cab. Track...

[email protected] www.tadano.com Tadano Ltd. Kanda Square 18th Floor, 2-2-1 Kanda-Nishikicho, Chiyoda-ku, Tokyo 101-0054, Japan Phone: +81-3-6811-7309 (International Division) Tadano America Corporation 4242 West Greens Road, Houston, TX 77066 Phone: +1 (281) 869-00300 · Fax: +1 (281) 869-0040