S0MV16 SeriesINTERFACE PUSH BUTTONS • 016MM • NONC<§> DISTINCTIVE FEATURES crisp tactile feedback momentary NONC contact form Z 10A @ 250 V custom wiring on request IP67 pre-travel: 1.3mm over-travel: 0.15mm travel: 2.3mm jff ELECTRICAL CHARACTERISTICS Max. voltage: 250 Vac Max. current with resistive load: Initial contact resistance: 25 mQ Insulation resistance: 1000 MQ min. at 500Vdc Electrical life: Dielectric strength: 1000 VAC, 50Hz, 60 seconds Mechanical life: 500.000 cycles min. Body material: UL94V0 thermoplastic Contact material: silver alloy / gold-plated silver alloy Typical panel cut-out: 16/14.45 mm d-flat Panel thickness: 5mm max. Min. pitch for matrix Installation: 24 x 24 mm Soldering profile: 300°C max, for 5 seconds SOMV16 SERIES - MINIATURE PUSH BUTTONS • DIA.16 MM • NONC O ENVIRONMENTAL CHARACTERISTICS Operating temperature: -40°C to +85°C IP67 front-face sealing IP40 rear sealing Compliant with IEC1058-1 standard

INTERFACE PUSH BUTTONS • 016MM • NONC Contact moteflo! Connector type Contact form Actuator Version Material Colour Contact material Silver Alloy (std.) Gold-plated Silver Alloy about this series 1 sennet U. DESIGN: custom button wiring produced to your rtquirements ond recbntcoi specifications. Our push buttons are supplied as standard with a hexagonal nut in nickel-plated brass and a sealing gasket. NON-ILLUMINATED - SOLDER TABS A ACCESSORIES & OPTIONS Asome configurations may not be available or may be subject to a m.o.q. J FOR ALL YOUR CUSTOM ^ REQUESTS, CONTACT US!