S0AV6 SeriesSAFETY PUSH BUTTONS • 040MM • UP TO 4NO/4NC • ILLUMIN'f7 DISTINCTIVE FEATUl___ large actuation surface excellent tactile feel momentary or maintained up to 4NO/4NC form B 3A @ 220 V Custom illuminated logo on request custom wiring on request custom marking on request fk ELECTRICAL CHARACTERISTICS Maximum voltage: 250 V MECHANICAL CHARACTERISTICS Actuation force: 2 to 5 Newtons Max. current with resistive load: Travel: 1.5mm to 2.5mm Initial contact resistance: 50 mO max Mechanical life: 500.000 cgcles Electrical life: 100.000 cgcles at max load Dielectric strength: 1500 VAC. 50Hz. 50 seconds LED supplg: 6,12. 24 or 48V Tgpical LED life: 40.000 hours Bodg material: SST 304 Actuator material: SST 316 Terminal material: gold-plated copper Contact material: gold-plated silver O ENVIRONMENTAL CHARACTERISTICS Operating temperature = -30°C to +85°C Front face sealed to IP67 Compliant with IEC60947-5-1 standard Compliant with GB14048.5 standard 1= GENERAL CHARACTERISTICS Tgpical panel cut-out: 40.5mm Panel thickness: 12mm max. Min. pitch for matrix installation: 44 x 44 mm Soldering profile: 300°C max. for 5 seconds SOAV6 SERIES - VANDAL-RESISTANT PUSH BUTTONS • DIA.40 MM • NONC~4NO4NC • ILLUMINATED

SAFETY PUSH BUTTONS • 040MM • UP TO 4N0/4NC • ILLUMINATED OhJOtor Poles Ftrction Co-necic Function - Momentary Z Maintained / latching Actuator / Illumination ■ Flush, non-illuminated E Flush, illuminated ring J Raised, illuminated ring Connector type Solder tabs / Ouickconnect Contoct Type FWire leads’ ^ ABOUT THIS SERIES 1 service □ U.DESIGN: custom actuator design, custom illuminated logo, laser-marked logo (see logo index) 2 service □ U.DESIGN: custom button wiring produced to your requirements and technical specifications. 3 Body and actuator in nickel-plated brass on request and subject...

SAFETY PUSH BUTTONS • 04OMM • UP TO 4N0/4NG • iLLUMiNATED

SAFETY PUSH BUTTONS • 04OMM • UP TO 4N0/4NC • ILLUMINATED SOAV6DZS- FLUSH - ILLUMINATED RING - 1NO/1NC SOAV6ES** SST, momentary RAISED - ILLUMINATED RING - 1NO/1NC

• select the LED colour and resistor value in the Order Guide • select the LED colour and resistor value in the Order Guide ACCESSORIES & OPTIONS custom wiring and finish subject to MOQ nuts, sealing caps, connectors: see the "Accessories" section at the end of the catalogue Momentary, dark grey anodised