S0AV5 SeriesSAFETY PUSH BUTTONS • 025/03OMM • UP TO 2NO/2NC • ILLUMINATED 'f7 DISTINCTIVE FEATURES good actuation surface , excellent tactile feel ' momentary or maintained up to 2NO/2NC form B 3A @ 220 V Custom illuminated logo on request custom wiring on request custom marking on request Operating temperature = -30°C to +85°C Front face sealed to IP67 Compliant with IEC60947-5-1 standard Compliant with GB14048.5 standard fk ELECTRICAL CHARACTERISTICS Maximum voltage: 250 V Max. current with resistive load: Initial contact resistance: 50 mO max Electrical life: 100.000 cycles at max load Dielectric strength: 1500 VAC. 50Hz. 50 seconds LED supply: see Order Guide on next page Typical LED life: 40.000 hours MECHANICAL CHARACTERISTICS Actuation force: 2 to 5 Newtons Travel: 1.5mm to 2.5mm Mechanical life: 500.000 cycles Base material: PA66 Body material: see Order Guide on next page Actuator material: see Order Guide on next page Terminal material: gold-plated copper Contact material: gold-plated silver 1= GENERAL CHARACTERISTICS Typical panel cut-out: 25.5mm / 30.5mm Panel thickness: 12mm max. Min. pitch for matrix installation: 30 x 30 mm Soldering profile: 300°C max. for 5 seconds SOAV5 SERIES - VANDAL-RESISTANT PUSH BUTTONS • DIA.25 - 30 MM • NONC~2NO2NC • ILLUMINATED

SAFETY PUSH BUTTONS • 025/03OMM • UP TO 2N0/2NC • ILLUMINATED ORDER GUIDE E 22 Z F S B 6 Cut-out diam. / contact type Actuator / Illumination - Flush, non-illuminated E Flush, illuminated ring J Raised, illuminated ring Contact Type Function - Momentary Z Maintained / latching Connector type - Solder tabs / Quickconnect Body / actuator material S Stainless steel (standard) K) Nickel-plated brass3 A Anodised aluminium4 ^ ABOUT THIS SERIES 1 service □ U.DESIGN: custom actuator design, custom illuminated logo. 2 service □ U.DESIGN: custom button wiring produced to your requirements and technical...

SAFETY PUSH BUTTONS • 025/03OMM • UP TO 2N0/2NC • ILLUMINATED 025MM - RAISED ACTUATOR - NON-ILLUMINATED - 1NO/1NC SOAV5HS stainless steel, momentary SOAV5HZS stainless steel, maintained 025MM - FLUSH ACTUATOR - ILLUMINATED DOT - 1NO/1NC SOAV5DS stainless steel, momentary SOAV5DZS stainless steel, maintained • select the LED colour and resistor value in the Order Guide 025MM - FLUSH ACTUATOR - ILLUMINATED RING - 1NO/1NC SOAV5EA” black anodised alu., momentary SOAV5EZA” black anodised alu., maintained • select the LED colour and resistor value in the Order Guide

SOAV5 Series safety push buttons • ø25/ø30mm • up to 2no/2nc • illuminated Ø30MM - FLUSH ACTUATOR - NON-ILLUMINATED - 1NO/1NC SOAV5LS•• stainless steel, momentary SOAV5LZS•• stainless steel, maintained • select the LED colour and resistor value in the Order Guide Ø30MM - FLUSH ACTUATOR - ILLUMINATED RING - 1NO/1NC SOAV5LES•• stainless steel, momentary SOAV5ELZS•• stainless steel, maintained • select the LED colour and resistor value in the Order Guide Ø30MM - FLUSH ACTUATOR - ILLUMINATED DOT - 1NO/1NC stainless steel, momentary stainless steel, maintained • select the LED colour and resistor...

SAFETY PUSH BUTTONS • 025/03OMM • UP TO 2N0/2NC • ILLUMINATED SOAV5LJS- stainless steel, momentary SOAV5LJZS- stainless steel, maintained LED colour and resistor value in the Order 03OMM - FLUSH ACTUATOR - FULLY SEALED - 1NO SOAV5LFS stainless steel, momentary connector not compatible with the RGB illuminated version of the button Wire characteristics: stranded, cross-section I.5mm2 SOAC5-C: empty connector housing / SOAC3-M: 2.8 terminal for custom wiring and finish