SOAV4 series
1 / 4Pages

SOAV4 series security pushbutton switches • ø22mm • up to 2no2nc • led illuminated DISTINCTIVE FEATURES large actuation surface excellent tactile feedback superbright LED momentary or latched up to 2NO/2NC DPDT 3A @ 220 V specific wiring upon request specific marking upon request MECHANICAL SPECIFICATIONS Actuation force : from 2 to 5 Newtons Max current/voltage with resistive load : 3 A @ 220Vac / 5A @ 24 Vdc Initial contact resistance : 50 mΩ max Mechanical life : 500.000 cycles Insulation resistance : 1000 MΩ mini at 500Vdc Electrical life : 100.000 cycles at full load Body material : see Build you part number section Dielectric strength : 1500 VAC, 50Hz, 50 seconds Button material : see Build you part number section LED voltage : see Build you part number section Lugs material : gold plated copper LED typical life : 40.000 hours Contact material : gold plated silver GENERAL SPECIFICATIONS Operating temperature = from -30°C to +85°C Typical drilling diameter : 22.5mm Protection grade to IP67 - frontpanel Minimum pitch for matrix installation : 27 x 27 mm Compliant with IEC60947-5-1 standard Hand soldering : 300°C max. during 5 seconds Compliant with GB14048.5 standard MIXING COLORS SOAV4 SERIES - VANDAL RESISTANT PUSHBUTTONS • DIA.22 MM • NONC - 2NO2NC • ILLUMINATED

SOAV4 series security pushbutton switches • ø22mm • up to 2no2nc • led illuminated BUILD YOUR PART NUMBER Button / Lighting type - Flat, illuminated ring High, illuminated ring Momentary Latched Contact Type Solder lugs / Quickconnect Mono color LED : no polarity Bi-color LED : color change is made through polarity swap ABOUT THIS RANGE U.DESIGN service: custom button design upon request, custom marking, custom illuminated logo available on request. U.DESIGN service : custom wiring and harness upon request. 3 Nickel plated brass upon request and subject to MOQ. 4 Anodized aluminum with...

SOAV4 series security pushbutton switches • ø22mm • up to 2no2nc • led illuminated CONFIGURATION EXAMPLES FLAT BUTTON - NO ILLUMINATION - 1NO/1NC 25 FLAT BUTTON - ILLUMINATED DOT - 1NO/1NC L please choose LED color and voltage in Build your part number section, FLAT BUTTON - ILLUMINATED RING - 1NO/1NC L • please choose LED color and voltage in Build your part number section, HIGH ROUND BUTTON - ILLUMINATED RING - 1NO/1NC L please choose LED color and voltage in Build your part number section,

SOAV4 series security pushbutton switches • ø22mm • up to 2no2nc • led illuminated FLAT BUTTON - ILLUMINATED DOT - 2NO/2NC SOAV4D22S•• momentary please choose LED color and voltage in Build your part number section, equiped with 6 wires of 15 cm dedicated to SOAV4 1 Pole Lit non equiped plastic body equiped with 4 wires of 15 cm dedicated to SOAV4 1 Pole non lit 2.8 type female lugs for SOAC4-C connector is not compatible with the RGB lit version of the pushbutton Illuminated customized logo MOQ required no technical fees Custom designed wiring MO