S0AV4 Series SAFETY PUSH BUTTONS • 022MM • UP TO 2NO/2NC • ILLUMINATED •'f7 DISTINCTIVE FEATURES good actuation surface excellent tactile feel momentary or maintained up to 2NO/2NC form B 3A @ 220 V High-brightness LED Custom illuminated logo custom wiring on request Actuation force: 2 to 5 Newtons Travel: 1.5mm to 2.5mm fk ELECTRICAL CHARACTERISTICS Maximum voltage: 250 V Max. current with resistive load: 3 A @ 220Vac / 5A @ 24 Vdc Initial contact resistance: 50 mO max Insulation resistance: 1000 MO min. at 500Vdc Electrical life: 100.000 cycles at max load Dielectric strength: 1500 VAC. 50Hz. 50 seconds LED supply: see Order Guide on next page Typical LED life: 40.000 hours O ENVIRONMENTAL CHARACTERISTICS Operating temperature = -30°C to +85°C Front face sealed to IP67 Impact resistance: IK10 Compliant with IEC60947-5-1 standard Compliant with GB14048.5 standard Mechanical life: 500.000 cycles Base material: PA66 Body material: see Order Guide on next page Actuator material: see Order Guide on next page Terminal material: gold-plated copper Contact material: gold-plated silver Typical panel cut-out: 22.5mm Panel thickness: 12mm max. Min. pitch for matrix installation: 30 x 30 mm Soldering profile: 300°C max. for 5 seconds SOAV4 SERIES - VANDAL-RESISTANT PUSH BUTTONS • DIA.22 MM • NONC~2NO2NC • ILLUMINATED

SAFETY PUSH BUTTONS • 022MN • UP TO 2N0/2NC • ILLUMINATED ORDER GUIDE SOAV 4E 22 Z Cut-out oiam. Actuator / Illumination • Flush, non-illuminaled E Flush, illuminated ring j Raised, illuminated ring - Momentary z Maintained / latching Contact type Connector type - Solder tabs / Quickconnect Boot / actuator material s Stainless steel (standard) N Nickel-plated brass1 A Anodised aluminium4 ABOUT THIS SERIES 1 service C U DESIGN: custom actuator design, custom illuminated logo 2 service C U.DESIGN: custom button v/trmg produced to your requirements and technical specifications. 3 Body and actuator...

SAFETY PUSH BUTTONS • 022MM • UP TO 2N0/2NC • ILLUMINATED FLUSH ACTUATOR - ILLUMINATED RING - 1NO/1NC RAISED ACTUATOR - ILLUMINATED RING - 1NO/1NC

SAFETY PUSH BUTTONS • 022MM • UP TO 2N0/2NC • ILLUMINATED • select the LED colour and resistor value in the Order Guide A ACCESSORIES & OPTIONS QUICK CONNECTOR SOAV4 connector not compatible with the RGB illuminated version of the button Wire characteristics: stranded, cross-section 1,5mm2 SOAC4-C: empty connector housing / SOAC3-M: 2.8 terminal for SOAC4-C housing