S0AV3 Series SAFETY PUSH BUTTONS • 019MM •UP TO 2N0/2NC • ILLUMINATEDIf DISTINCTIVE FEATURES excellent tactile feel momentary or maintained up to 2NO/2NC form C 3A @ 220 V Custom illuminated logo on requestcustom wiring on request O ENVIRONMENTAL CHARACTERISTICS Operating temperature = -40°C to +70°C Front face sealed to IP67 Compliant with IEC60947-5-1 standard Compliant with GB14048.5 standard jft ELECTRICAL CHARACTERISTICS Maximum voltage: 250 V Max. current with resistive load: Initial contact resistance: 50 mO max Electrical life: 100.000 cycles at max load Dielectric strength: 1500 VAC. 50Hz. 50 seconds LED supply: see Order Guide on next page Typical LED life: 40.000 hours $£ MECHANICAL CHARACTERISTICS Actuation force: 2 to 5 Newtons Travel: 1.5mm to 2.5mm Mechanical life: 1.000,000 cycles Base material: PA66 Body material: see Order Guide on next page Actuator material: see Order Guide on next page Terminal material: gold-plated copper Contact material: silver-plated EE GENERAL CHARACTERISTICS Typical panel cut-out: 19.5mm Panel thickness: 20mm max. Min. pitch for matrix installation: 24 x 24 mm Soldering profile: 300°C max. for 5 seconds SOAV3 SERIES - VANDAL-RESISTANT PUSH BUTTONS • DIA.19 MM • NONC~2NO2NC • ILLUMINATED

SOAV3 S0AV3 Series SAFETY PUSH BUTTONS • 019MM • UP TO 2N0/2NC • ILLUMINATED D Flush. Illuminated dot Function E Flush, illuminated ring . Momentary J Raised, ilium, ring z Maintained, |atchinq k Flush, illuminated ‘stand-by' logo Connection type Solder lugs / Quick-connect Contact type f ®'re ^ads* Boot / actuator material A Black anod. aluminium T3 ABOUT THIS SERIES1 service C U DCSfGN: custom ocfuofor design, custom illuminated logo 2 service C U DESIGN: custom button wiring produced ro your requirements and technlcol specipcottons ■for I or 2 colours, select the colour from the hst. for bi-coiour...

SAFETY PUSH BUTTONS • 019MM • UP TO 2N0/2NC • ILLUMINATED FLUSH ACTUATOR - NON-ILLUMINATED - 2NO/2NC FLUSH ACTUATOR - ILLUMINATED “STAND-BY” LOGO - 1NO/1NC SOAV3KS« stainless steel, momentary stainless steel, maintained • select the LED colour and resistor value in the Order Guide FLUSH ACTUATOR - ILLUMINATED RING - 1NO/1NC FLUSH ACTUATOR - ILLUMINATED DOT SOAV3DS« stainless steel, momentary stainless steel, maintained select the LED colour and resistor value in the Order

SAFETY PUSH BUTTONS • 019MM • UP TO 2N0/2NC • ILLUMINATED RAISED ACTUATOR - ILLUMINATED RING - 2NO/2NC EMERGENCY STOP ACTUATOR - 1NO/1NC Wire characteristics: stranded, cross-section 1,5mm2 SOAC3-C: empty connector housing / SOAC3-M: 2.8 terminal for SOAC3-C housing custom wiring and finish subject to MOQ custom illuminated logos sublet to MOQ

SAFETY PUSH BUTTONS • 019MM • UP TO 2N0/2NC • ILLUMINATED type Moleria Cut-out diam. M Momentary positions z Maintained positions No LEO illumination Illuminated LED ring Contact type Connection type Solder lugs / Quick-connect F Wire leads7 BODT / ACTUATOR MATERIAL Stainless steel Nickel-plated brass Anod. aluminium5 T3 ABOUT THIS SERIES 1 Key selector switch non-illuminated only. 2 service C U.DESKSN: custom button wiring produced to your requirements and technical specifications. 3 Body ond actuator in anodised aluminium, custom colour on request and sub/ect to MOQ 4 Protection resistor built...

SOAV3 Series safety push buttons • ø19mm • up to 2no/2nc • illuminated PULSED BUZZER - ILLUMINATED SOAV3U2ES•• stainless steel • select the LED colour and resistor value in the Order Guide