
Product Overview:
The SOAV2 Series consists of safety push buttons with a diameter of 16mm. These push buttons are designed for industrial safety applications and offer configurations of up to 2 normally open (NO) and 2 normally closed (NC) contacts. They are illuminated to provide clear visual status indication.
Key Specifications:
Features and Benefits:
Accessories and Options:
Various accessories are available to complement the push buttons, including the knurled nut and LED components. Note that some configurations may be subject to minimum order quantities (M.O.Q.) or may not be available depending on the specific option.
Important Notes:
- Availability of certain configurations may be limited.
- Ensure compatibility with system requirements before ordering.
S0AV2 Series SAFETY PUSH BUTTONS • 016MM • UP TO 2NO/2NC • ILLUMINATED •¥ DISTINCTIVE FEATURES excellent tactile feel momentary or maintained up to 2NO/2NC form C 3A @ 220 V Custom illuminated logo on request custom wiring on request custom marking on request ELECTRICAL CHARACTERISTICS Maximum voltage: 250 V Max. current with resistive load: Initial contact resistance: 50 mQ max Electrical life: 100.000 cycles at max load Dielectric strength: 1000 VAC. 50Hz. 50 seconds LED supply: see Order Guide on next page Typical LED life: 40.000 hours O ENVIRONMENTAL CHARACTERISTICS Operating temperature = -25°C to +55°C Front face sealed to IP67 Compliant with IEC60947-5-1 standard Compliant with GB14048.5 standard Actuation force: 2 to 5 Newtons Travel: 1,5mm to 2.5mm Mechanical life: 1.000.000 cycles Base material: PC Body material: see Order Guide on next page Actuator material: see Order Guide on next page Terminal material: gold-plated copper Contact material: silver-plated GENERAL CHARACTERISTICS Typical panel cut-out: 16.5mm Panel thickness: 15mm max. Min. pitch for matrix installation: 24 x 24 mm Soldering profile: 300°C max. for 5 seconds SOAV2 SERIES - VANDAL-RESISTANT PUSH BUTTONS • DIA.16 MM • NONC~2NO2NC • ILLUMINATED
Open the catalog to page 1SAFETY PUSH BUTTONS • 016MN • UP TO 2N0/2NC • ILLUMINATED Border guide Actuate' Potes Ccnnec: onijpe Mars-al .ED colour Actuator / Illumination E Hush, illuminated ring J Raised, ilium, ring K Flush, illuminated power-on logo Contact type Function - Momentary z Maintained / latching Connection type Solder lugs / Quick-connect F Wire leads’ Booy / ACTUATOR material T3 ABOUT THIS SERIES 1 service C U DESIGN: custom actuator tiesign, custom marking custom illuminated logo 2 service T U DESIGN: custom button v/tnng produced to your requirements and technical specifications 3 Body and actuator in...
Open the catalog to page 2SAFETY PUSH BUTTONS • 016MM • UP TO 2N0/2NC • ILLUMINATED FLUSH ACTUATOR - NON-ILLUMINATED - 1NO/1NC RAISED ACTUATOR - NON-ILLUMINATED - 1NO/1NC FLUSH ACTUATOR - ILLUMINATED RING - 1NO/1NC
Open the catalog to page 3SAFETY PUSH BUTTONS • 016MM • UP TO 2N0/2NC • ILLUMINATED SOAV2DS** stainless steel, momentary SOAV2JS** stainless steel, momentary stainless steel, maintained • select the LED colour and resistor value in the Order Guide SOAV2IS- stainless steel, momentary
Open the catalog to page 4SAFETY PUSH BUTTONS • 016MM • UP TO 2N0/2NC • ILLUMINATED FLUSH ACTUATOR - ILLUMINATED POWER-ON LOGO - 1NO/1NC SOAV2KS« stainless steel, momentary SOAV2KZS** stainless steel, maintained • select the LED colour andresislor value in the Order Guide QUICK CONNECTOR Wire characteristics: stranded, cross-section 1,5mm2 SOAC2-C: empty connector housing / SOAC3-M: 2.8 terminal for SOAC2-C housing 80-000217 '/ U.I'JtSIRN Custom wiring example based on SOAV2DNB12 custom illuminated logo sublet to MOQ no tooling charges
Open the catalog to page 5134 Pages
4 Pages
3 Pages
3 Pages
4 Pages
24 Pages
4 Pages
4 Pages
4 Pages
4 Pages
4 Pages
5 Pages
3 Pages
6 Pages
6 Pages
5 Pages
6 Pages
2 Pages
7 Pages
4 Pages
2 Pages
2 Pages