SAFETY PUSH BUTTONS • 019MM • NO • ILLUMINATED 'f7 DISTINCTIVE FEATURES illuminated versions NO momentary contact 3A @ 220 V custom wiring on request custom illuminated logo on request Maximum voltage: 250 V Max. current with resistive load: 3 A @ 220Vac / 5A @ 24 Vdc Initial contact resistance: 50 mO max Insulation resistance: 1000 MO min. at 500Vdc Electrical life: 100.000 cycles at max load Dielectric strength: 1000 VAC, 50Hz, 50 seconds LED supply: see Order Guide Typical LED life: 40.000 hours Operating temperature = -40°C to +85°C Impact resistance: IK10 (non-illuminated version) Front face sealed to IP67 Compliant with IEC60947-5-1 standard Compliant with GB14048.5 standard Mechanical life: 1.000.000 cycles min. Base material: PA66G30 Body material; see Order Guide Actuator material: see Order Guide Contact material: silver-plated Typical panel cut-out: 19.5mm Panel thickness: 14mm max. Min. pitch for matrix installation: 24 x 24 mm Soldering profile: 300°C max. for 5 seconds SOAV119 SERIES - VANDAL-RESISTANT PUSH BUTTONS • DIA.19 MM • NO • ILLUMINATED

SAFETY PUSH BUTTONS • 019MM • NO • ILLUMINATED Border guide FOTlilj ActootcT Conreclicn t^pe Material LED coicjr LED Actuator / Illumination f Flush, non-illuminated E Flush, illuminated ring j Raised, ilium, ring M 'Fully flat", ilium, ring K Flush, illuminated logo1 C Custom1 Connection type 0 Screw terminals J Solder lugs / Quick-connect Body / actuator material A Black anod. aluminium ABOUT THIS SERIES 1 service C U.DESIGN: custom actuator design on request, custom marking on request, custom illuminated logo on request 2 service C U DESIGN: custom button wtimg produced to your requirements...

SOAV119 Series safety push buttons • ø19mm • no • illuminated RAISED ACTUATOR - NON-ILLUMINATED - SCREW TERMINALS 26 stainless steel, momentary

SOAV119 Series safety push buttons • ø19mm • no • illuminated FULLY FLAT ACTUATOR - ILLUMINATED RING - SOLDER LUGS SOAV119MJS•• stainless steel, momentary • select the LED colour and resistor value in the Order Guide FLUSH ACTUATOR - ILLUMINATED RING - SOLDER LUGS SOAV119EJS•• stainless steel, momentary • select the LED colour and resistor value in the Order Guide RAISED ACTUATOR - ILLUMINATED RING - SOLDER LUGS SOAV119JJA•• black alu., momentary • select the LED colour and resistor va

SAFETY PUSH BUTTONS • 019MM • NO • ILLUMINATED FLUSH ACTUATOR - ILLUMINATED STAND-BY LOGO - SCREW TERMINALS FLUSH ACTUATOR - ILLUMINATED DOT - SOLDER LUGS RAISED ACTUATOR - ILLUMINATED DOT - SOLDER LUGS stainless steel, momentary • select the LED colour and resistor value in the Order Guide

SAFETY PUSH BUTTONS • 019MM • NO • ILLUMINATED y U.DESIGN custom illuminated logo custom wiring and finish custom surface treatment added flat