METAL PUSH BUTTONS • DIA. 16MM¥ DISTINCTIVE FEATURES compact, modern design illuminated versions Momentary or maintained very high durability ELECTRICAL CHARACTERISTICS Max. current with resistive load: 2A / 36Vdc Electrical life: Momentary: 500.000 cycles at max. load Maintained: 100.000 cycles at max. load Insulation resistance: 1 GO min, DC500V Dielectric strength: 2000V RMS Initial contact resistance: 50mO max Actuation force: 4,5 Newtons ±1,5N Travel: 2 mm ±0,3mm Contact bounce: 10ms Mechanical life: 1.000.000 cycles Typical LED lifespan: 40.000 hours Max. current for the LED: 20mA Contact: silver alloy Body: aluminium alloy Actuator: aluminium alloy Terminals: gold-plated copper Wires: multi-strand AWG20, 0.6mm2 UL certified 0 ENVIRONMENTAL CHARACTERISTICS SE GENERAL CHARACTERISTICS Operating temperature: -20°C to +70°C Typical panel cut-out diameter: 16 mm Protection rating: IP67 Panel thickness: 8,00 mm Compliant with IEC60947-5-1 Tightening torque: 11,54 Kg.f/cm Soldering profile: 300°C max. for 5 seconds RdHSi/ EAGLE SERIES - METAL PUSH BUTTONS • DIA.16 MM • NO • ILLUMINATED

METAL PUSH BUTTONS • DIA. 16MM / ORDER GUIDE EA E Z J A2 B 12 Panel Cut-out Diameter 16 Dia. 16 mm, IP67 Actuator Version E Domed, illuminated ring P Domed, illuminated Power-On logo LED Power Supply5 - Non-illuminated 3 3 Vdc (no resistor) Connection J Solder lugs ci Soldered/protected wire outlet F1500mm1 A Black anodised aluminium A2 Natural anodised aluminium LED Colour - Non-illuminated R Red G Green Y Yellow B Blue W White RG Red & Green RB Red & Blue BW Blue & White RGB2 Red / Green / Blue about this series 1 Customable wire outlets with connectors, sleeving, etc... Our buttons are supplied...

WIRING DIAGRAMS Non Lumineux Led Mono-couleur Led Bi-couleur MAINTAINED VERSION (LATCHING) Led Bi-couleur Note: Push-OFF, not illuminated Push-ON, Green LED illuminated (Latching) Note: Push-OFF, Red LED illuminated Push-ON, Green LED illuminated (Latching) Natural anodised aluminium, momentary, solder lugs DOMED ACTUATOR - ILLUMINATED - NO - MOMENTARY EA16EJA” Black anodised aluminium, momentary, solder lugs • select the LED colour and resistor value in the Order Guide

metal push buttons • dia. 16mm DOMED ACTUATOR - ILLUMINATED LOGO - NO - MOMENTARY EA16PJA•• Black anodised aluminium, momentary, solder lugs • select the LED colour and resistor value in the Order Guide RAISED ACTUATOR - NON-ILLUMINATED - NO - MOMENTARY EA16HJA2 Black anodised aluminium momentary, solder lugs DOMED ACTUATOR - ILLUMINATED RING - NO - MAINTAINED EA16EZJA2•• Natural anodised aluminium, maintained, solder lugs • select the LED colour and resistor value in the Order Guid