SHORT-PROFILE SAFETY PUSH BUTTONS •NO OR NC • ILLUMINATED •¥ DISTINCTIVE FEATURESextra-short travel reduced rear footprint RGB illuminated versions 2 A @ 36 Vdccustom wiring on requestfk ELECTRICAL CHARACTERISTICS Max. voltage: 36 Vdc Max. current with resistive load: Initial contact resistance: 50 mO max Insulation resistance: 120 MO min Electrical life: 200.000 cycles at max. load Dielectric strength: 2000 VAC, 50Hz, 50 seconds LED power supply: see order guide on next page Typical LED lifespan: 40.000 hours O ENVIRONMENTAL CHARACTERISTICS Operating temperature = from -30°C to +55°C Front sealed to IP67 Vibration resistance: 10 to 55Hz, amplitude 1.2mm p-p IDEAL FOR. $£ MECHANICAL CHARACTERISTICS Actuation force: 4 Newtons ±1 N Travel: 0.5mm ±0.1mm Mechanical life: 1.000.000 cycles Base material: PA66 Body material: see order guide Actuator material: see order guide Terminal material: tin-plated brass Typical panel cut-out: see order guide Soldering profile: 260°C max. for 3 seconds Compliant with IEC60947-5-1 - GB14048.5 ALFA SERIES - SHORT-PROFILE VANDAL-RESISTANT PUSH BUTTONS • 01A16 -19 - 22 - 25 MM • NO OR NC • ILLUMINATED

Border guide ALFA 77 SHORT-PROFILE SAFETY PUSH BUTTONS 19 E J S B 6 Panel Cut-out Diameter / Contact Type 16 dia. 16mm / form X 19 dia. 19mm / form X 22 dia. 22mm / form X 25 dia. 25mm / form X 30 dia. 30mm / form X Actuator Type Flush actuator Non-illuminated Raised actuator Non-illuminated Flush actuator Illuminated ring Illuminated ring Black anodised aluminium, A other anodising colours Connection available on re^uest J Solder lugs / Quickconnect F Sealed wire outlet 3 about this series 1 U.DESIGN service: custom octuotor design on request, illuminated logo, custom marking or pot on request....

SHORT-PROFILE SAFETY PUSH BUTTONS DIA.12MM - FLUSH ACTUATOR - NON-ILLUMINATED

DIA.12MM - FLUSH ACTUATOR - ILLUMINATED