RF Amplifier TE3201-2_datasheet
2Pages

{{requestButtons}}

Catalog excerpts

RF Amplifier TE3201-2_datasheet - 1

PRELIMINARY MODEL TE3201/2 PXIe based Single/Dual Channel 20GHz 30dBm RF amplifier Model TE3201/2 is a single/dual channel RF amplifier in a single slot PXIe form factor that can operate from 100kHz to 20GHz, designed for high frequency, and high power signal amplification. With an ultra-high bandwidth of almost 20GHz and up to +30dBm power into 50 ohms, the TE3201/2 is the ideal complimentary amplifier to any signal source that needs an extended power boost for demanding applications. 100kHz to 20GHz RF Signal Amplifier Cascade two channels for up to 25dB gain Reverse Polarity protection Over/under voltage protection Enhancing Performance The TE3201/2 was designed to extend the power range of the Tabor arbitrary waveform generators and RF signal generators for applications, requiring a higher output power to drive their DUT (Device Under Test). With the channels cascaded the TE3201/2 can provide up to 25dB gain and can reach a maximum saturated power of 30dBm into 50 ohms loads, without compromising signal integrity. Cost Effective Versatile Solution While the TE3201/2 was designed with the Tabor units in mind, it can be used as a Standalone RF amplifier for any signal source. The TE3201/2 offers one or two channels in a compact and cost-effective solution for extending any signal source’s power performance. Target Applications Target applications for the TE3201/2 are diverse and include various RF applications, such as receiver testing, multi-tone testing, and general electronics and scientific applications. The new TE3201/2 is an ideal solution for virtually any wide bandwidth application that requires high power and high frequency signal amplification. For more information or to schedule a demo call today or visit our website www.taborelec.com

Open the catalog to page 1
RF Amplifier TE3201-2_datasheet - 2

PXIe based Single/Dual Channel 20GHz 30dBm RF amplifier Specification RF CHARACTERISTICS Frequency Range: Input Return Loss: Output Return Loss: Single slot PXIe Without Package: Shipping Weight: Noise Figure: Reverse Isolation: Second Harmonic: Reverse Polarity, Over Voltage, Under Voltage, Over Current, and Open-Short Load 1 / 3 year warranty plan ORDERING INFORMATION MODEL PXIe based Single Channel 20GHz PXIe based Dual Channel 20GHz 30dBm RF amplifier Jumper cable for TE3202 for cascading CH1 and CH2 All rights reserved to Tabor Electronics ltd. Tabor makes no representations nor...

Open the catalog to page 2

All Tabor Electronics catalogs and technical brochures

  1. WX1281B

    5 Pages

  2. WW2571A

    5 Pages

  3. WS8352

    5 Pages

  4. Model 3180

    2 Pages

Archived catalogs