MODEL A1016045MHz 34Vp-p Single Channel Signal Amplifier • 45MHz bandwidth • High amplitude to 34Vp-p into 500 • High output current drive to 1A • Fast transition time of <10ns • Small footprint, all metal case • Custom gain configuration Model A10160 is an ultra-small footprint, wideband, DC coupled amplifier designed for high frequency, high current, signal amplification. With a high bandwidth of 45MHz, 34Vp-p into 50 ohms and up to 10W output power, the A10160 is the ideal complimentary amplifier to any signal source that needs a supporting power boost for demanding applications. The A10160 was designed as a “Snap-On” accessory for the Tabor WaveXciter series and models WS8351/2, both having a maximum amplitude of 4Vp-p, which can be limiting for some applications, requiring higher voltage and current to drive their UUT. Combined with the A10160 the WX and WS models will now offer even higher abilities to solve demanding application requiring up to 45MHz signals at 34Vp-p into 50 ohms loads, without compromising their signal integrity. With a peak output current of 1A and 750mA continuous the A10160 enables a continuous power output of 7.5W, and a peak output power of up to 10W, making it ideal for various pulse applications. While the A10160 was designed with the Tabor units in mind, it can be used as a standalone amplifier for any signal source. The A10160 offers a compatible, compact and cost effective solution for extending any signal source’s power performance. The A10160’s standard configuration enables a maximum output voltage of 34Vp-p into 50 ohms with a gain of x10. Other custom gain, such as x15 or 20 can be ordered at the time of the purchase, enabling clients’ even wider variety of choices to solve their application. While target applications include piezoelectronics, transducer characterization, MEMS, general electronics and scientific applications, the new A10160 is an ideal solution for virtually any wide bandwidth application that requires high voltage and high current amplification. Lambda Photometries Limited Lambda House Batford Mill Harpenden Herts AL5 5BZ United Kingdom

Specification INPUT CHARACTERISTICS GENERAL ORDERING INFORMATION Channels: Type: Connector: Impedance: Coupling: Damage Level: Single Ended Front panel SMA 50Q DC OUTPUT CHARACTERISTICS Voltage: ±20VDC Power Consumption: 20W Signal Ground: Grounded Dimensions: 45 x 30 x 85 mm (W x H x D) Without Package 115 g (Standalone) Shipping Weight Single Ended xIO, fixed (x15 gain optional) Short Circuit to Case Ground & thermal protection MODEL DESCRIPTION Channel Signal Amplifier Gain: 10 = x1Ogain,fixed 15 = x15 gain, fixed 20 = x2O gain, fixed (2) Specification is given for the standard configuration...