Engineered for Quality and Reliability MODEL SH-300 Taber Scuffing Head Attachment ® The Taber Scuffing Head Attachment SH-300 enables you to perform scuff, scrape and/or adhesion tests with the Taber Abraser. The range of materials includes vinyl, coated fabrics, leather, textiles, non-woven materials, fiberboard, rubber floor mats, carpets, plastics and painted products (including soft coating paint and pad printing on plastic substrates). OMPACT DESIGN MOUNTS DIRECTLY C TO WHEEL HUB OSITIVE STOP OF SCUFFING HEAD P ATTACHMENT ENSURES CORRECT ALIGNMENT OF SCUFFING HEAD EASY ATTACHMENT TO TABER ABRASER A TTACHMENT INCLUDES TOP BRACKET FEATURE THAT PREVENTS ROTATION OF SCUFFING HEAD TABER SCUFFING HEAD ATTACHMENT. SCUFFING HEADS SOLD SEPARATELY. SCUFFING HEAD SHOWN ON TABER ABRASER MODEL 1700 With more than 75 years of experience in material testing, Taber provides you with a resource you can depend on. Contact a Taber Sales Application Engineer at 1-800-333-5300 or email [email protected].

REDESIGNED FOR EASY TEST SET-UP Mounts to the left abraser arm wheel hub of the Model 1700 / 1750. The attachment holds the scuffing head at a 110° angle to the specimen turntable platform with the vertical centerline of the scuff head is positioned 32 mm from the center pin. As the specimen turntable platform rotates, the scuffing head is dragged over the specimen surface. Two weights are provided to obtain the required loads of 0.45kg or 0.9kg. The Taber Abraser is operated in the normal fashion however the right abraser arms is placed in the upright position and the vacuum system is not utilized....