Overview: The document describes a Bonded Strain Gage Pressure Transmitter designed for hazardous locations, featuring a 4-20 mA standard 2-wire output and entirely welded stainless steel construction. It operates from an unregulated power source and is unaffected by power supply reversal.
Specifications:- Output: 4-20 mAdc corresponding to zero to full-scale pressure.
- Span: 16.00 ±0.16 mAdc at 24 Vdc.
- Zero Balance: 4.00 ±0.16 mAdc at 24 Vdc.
- Accuracy: Within ±0.25% of span, ±0.50% for 15 PSI units.
- Resolution: Infinite.
- Proof Pressure Rating: 5.0 times range for 0-50 PSI, 2.0 times for 0-100 to 0-20k PSI.
- Burst Pressure Rating: 10 times range for 0-50 PSI, 4 times for 0-100 to 0-20k PSI.
- Compensated Temperature Range: -30°F to +170°F (-34°C to +77°C).
- Operating Temperature Range: -65°F to +200°F (-54°C to +93°C).
- Thermal Sensitivity Shift: Less than ±0.010% of span per °F.
- Thermal Zero Shift: Less than ±0.010% of span per °F.
- Shock: 30 G's for 11 milliseconds.
- Excitation: 15-40 Vdc unregulated.
- Insulation Resistance: 1000 megohms at 50 Vdc.
Materials: The case and electrical fitting are made of 304L and 316L stainless steel, while the pressure fitting and cavity are made of 17-4PH stainless steel.
Pressure Ranges: The transmitter supports various pressure ranges from 0-50 PSIA/PSIG/BAR to 0-20,000 PSIA/PSIG/BAR.
Connections:- Pressure Connection: 1/2-14 NPT internal, with a maximum recommended pressure of 25,000 PSI.
- Electrical Connection: 1/2-14 NPT internal for rigid conduit with two 3-foot leads, 16 AWG.
- Bleed Port: 1/16-27 NPT available as an option.
Installation: The unit is mounted by pressure fitting and is not position sensitive, simplifying installation without the need for brackets.
Contact Information: Taber Industries, 455 Bryant Street, North Tonawanda, New York 14120, USA. Phone: 1.800.333.5300 (U.S.) or 716.694.4000 (outside U.S.). Fax: 716.694.1450. Email:
[email protected]. Website: www.taberindustries.com.
See more