- Catalogs
- Taber Industries
- Differential Pressure Measurement Model 2217
Differential Pressure Measurement Model 2217
1 / 2 PagesView full catalog
Differential Pressure Measurement Model 2217
Product catalog summary
Overview: The document provides technical specifications for a Bonded Strain Gage Differential Pressure Transducer, highlighting its construction, performance parameters, and operational guidelines.
Materials and Construction: The transducer is constructed using austenitic materials, specifically 316 stainless steel for the case and pressure caps, and 347 stainless steel for the diaphragms. The pressure cap O-ring is made of Teflon®.
Performance Specifications: The transducer offers a full-scale output of 3.0 ±0.03 mV per volt excitation for the high side, calibrated at 10.00 Vdc. It maintains a zero balance of 0.00 ±0.03 mV per volt at +70°F (+21°C). Linearity, hysteresis, and repeatability are within ±0.25% FSO, ±0.25% FSO, and 0.20% FSO, respectively. The resolution is infinite.
Pressure and Temperature Ratings: The transducer can handle a differential overload pressure of 1200 PSID and a rated line pressure of 5000 PSIG. It operates within a compensated temperature range of -10°F to 160°F (-23°C to +71°C) and an operating temperature range of -40°F to 185°F (-40°C to +85°C).
Thermal Characteristics: The thermal sensitivity shift is less than ±0.020% FSO per °F, and the thermal zero shift is less than ±0.010% FSO per °F over the compensated temperature range.
Electrical Specifications: Recommended excitation is 10 volts dc or ac rms, with a maximum of 15 volts. Input and output resistances are 350 ±3.5 ohms and 350 ±5.0 ohms, respectively. Insulation resistance exceeds 10k megohms at 50 Vdc.
Connections and Enclosure: The pressure connection is a 7/16-20 internal thread per MS33649-4. The electrical receptacle is stainless steel, compatible with MS3106-14-2S. The entire housing and pressure cavity are made of stainless steel, ensuring environmental sealing.
Additional Information: The transducer weighs approximately 9.5 pounds (4.3 kg). For further inquiries, contact Taber Industries at the provided phone numbers or email.
See more
All Taber Industries catalogs and technical brochures
Taber Abraser - Calibration2 Pages
Taber Abrading Wheels2 Pages
Model 430/5302 Pages
Model 414/5141 Page
Falling Sand Abrasion Tester2 Pages
Model M22112 Pages
Crockmeter2 Pages
Fabric Stiffness Tester2 Pages
Taber Grit Feeder Attachment2 Pages
Webbing Abrasion Tester2 Pages
Reciprocating Abraser2 Pages
Heavy Duty Linear Abraser2 Pages
TABER Optical Micrometer2 Pages
TABER Shear / Scratch Tester2 Pages
Archived catalogs
TABER Linear Abraser2 Pages
TABER Multi-Media Abraser2 Pages
Related Searches
- AMOT testing machine
- AMOT material testing machine
- AMOT automatic testing machine
- Automatic test kit
- Micrometer
- AMOT manual testing device
- AMOT resistance testing machine
- Analog pressure transducer
- AMOT mechanical testing machine
- Membrane pressure transducer
- Manual testing machine
- Stainless steel pressure transducer
- AMOT torsion testing machine
- Relative pressure transducer
- Precision test kit
- Material test kit
- DC pressure transducer
- Gas pressure transducer
- Leather testing machine
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.