![TABANLI MAKINA SAN VE TIC LTD STI - logo](https://img.directindustry.com/images_di/logo-p/L4560632.gif)
Catalog excerpts
![TABANLI PULPER FINISHER - 1](https://img.directindustry.com/pdf/repository_di/4560632/tabanli-pulper-finisher-1076183_1m.jpg)
Adjusting mechanism of the gap between sieve and rotor blades PULPER FINISHER It is used to obtain and refine puree. It has three stages. 1st level: 1.5mm perforated stainless perforated sheet with conical sieve; In this first stage, the gap between the conical sieve and the rotating rotor blades can be adjusted with a special mechanism made of cast iron. 2nd level: 0.8mm perforated stainless steel sheet with cylindrical sieve; At this stage, the gap between the cylindrical sieve and the rotating rotor blades can be adjusted with the screw-nut system in the holders of the rotor blades. 3. Level: 0.6mm perforated stainless steel sheet with cylindrical sieve; At this stage, the gap between the cylindrical sieve and the rotating rotor blades can be adjusted with the screw-nut system in the holders of the rotor blades. All three levels will be mounted on a single stainless steel profile chassis. Made of AISI 304 Cr-Ni stainless steel material (excluding roller bearing bodies and motor, belt pulley on the rear tails) . 1st stage and 2nd stage are belt-pulley driven separately with a single 7,5kw/1430rpm motor, 3rd stage is belt-pulley driven with a single 3kw/1400rpm motor. The product inlet will be screwed above the 1st level and the product outlet will be from the bottom of the 3rd level. The pulp outlets will be from the front covers. The sieves are removable and attachable. There will be safety switches on the covers and there will be an electrical control panel with a stainless panel. TABANLI MAKINA SANAYI VE TICARET LIMITED SIRKETI Isabey mh. Ismetiye cd. No:153/3, 16290 YILDIRIM, BURSA / TURKEY email: info@tabanli.com
Open the catalog to page 1![TABANLI PULPER FINISHER - 2](https://img.directindustry.com/pdf/repository_di/4560632/tabanli-pulper-finisher-1076183_2m.jpg)
Electrical Control Panel Safety switches at the lids Optional Elevating Platform The walking area of the Platform with Railing and Ladder will be 1 meter from the ground and made of stainless steel Pulper Finisher Model. TPF3 on the optional Elevating Platform TABANLI MAKINA SANAYI VE TICARET LIMITED SIRKETI Isabey mh. Ismetiye cd. No:153/3, 16290 YILDIRIM, BURSA / TURKEY email: info@tabanli.com
Open the catalog to page 2All TABANLI MAKINA SAN VE TIC LTD STI catalogs and technical brochures
-
SORTING AND PACKAGING LINE
4 Pages
-
UNIVERSAL FRUIT WASHER
2 Pages
-
PEPPER CORER-HALVER
1 Pages
-
ROOT DRUM WASHER
2 Pages
-
ABRASIVE PEELER - BRUSHER
2 Pages
-
PEA DEPODDER
2 Pages
-
FRESH CORN HUSKER
3 Pages
-
AUTOMATIC CORN CUTTER
3 Pages
-
PEA PROCESSING
3 Pages
-
SPINACH PRESS CONVEYOR
1 Pages
-
VEGETABLE WASHER
2 Pages
-
SEED CORN HUSKER
3 Pages
-
CORN CUTTER KNIVES SHARPENER
2 Pages
-
GREEN BEAN SNIPPER
2 Pages
-
CORN HUSKER
2 Pages
-
SWEET CORN CUTTER
2 Pages