SEED CORN HUSKER
3Pages

{{requestButtons}}

Catalog excerpts

SEED CORN HUSKER - 1

SEED CORN HUSKER Model. TCH04M.16 It is used for stripping the layers of seed corn cob husk. There are a total of 32 rubber roller shafts. A total of 16 stripping lanes are formed between these 32 rubber-rolled shafts. (Raw Material Input Capacity: up to 10-12 tons/hour of seed corn cob) • All sheet metal parts and chassis are made of painted mild steel material. • The shafts on which the rolls are passed are very strong and flexible, and their diameter is 44.5mm and 4140 quality. • There are rubber rollers with special helical gear profiles threaded on the shafts. • Our rubber roll dimensions: (Bore diameter: 45mm=1 ¾” ; outer diameter:70mm±1mm * length: 295.5mm). • The number of teeth of standard profile Rolls is 11; Tire hardness is about 70~80 SHA. • The length of each roll line is approx. It is 1478mm=58”. • In the main Husker; rubber rollers shafts from both side are driven by motor+belt-pulley mechanism and bevel gearboxes with coupling. • Rubber roller shafts are supported by high quality special bearing Rg5 bronze bush bearings (feed side is bronze body and output side is aluminum body) from both ends, and the connection points of the housings of these bearings to the main machine body are supported in such a way that they can meet the stretches and stresses on the shafts that may occur in every axis. They also have a mechanism to bring both shafts closer to each other, which can meet the wear that will occur in the gear profiles on the rubber rollers over time. • In the main Husker; There is both side driven motor+reducer and crank arm driven “Pendulum (Oscilator) mechanism” that extends in the form of a plate from one place to the other and directs the cobs to the peeling lanes continuously by making a pendulum movement. Pendulum mechanism shafts are supported by special plastic bushing aluminum body bearings from both ends, and the connection points of the housings of these bearings to the main machine body are supported in such a way that they can meet the stretches and stresses on the shafts that may be on two axes. • There are central grease nipple ports in the main Husker. In this way, the grease can be transmitted from the points that the operator can reach safely and easily, even during the operation of the machine, to all the roller shaft bearings with special union-connected hydraulic hoses. • For the main “husker” drive system; There will be a total of two electric motors, each of which is 380V, 50Hz., 3 phases, 5.5 kW. • Two in total for the “Oscilator mechanism” drive system; There will be a total of two electric motor+reducers, each of which is 380V, 50Hz., 3 phases, 0.75 kW. • The electrical control panel is not included. TABANLI MAKINA SANAYI VE TICARET LIMITED SIRKETI Isabey mh. Ismetiye cd. No:153/3, 16290 YILDIRIM, BURSA / TURKEY

Open the catalog to page 1
SEED CORN HUSKER - 2

Optional Extras: a.) A pair of Shaker Feeder set It is used to feed the cob to husker machine regularly and to obtain maximum efficiency from the machine. It consists of two separate shakers on a single chassis. Each shaker has a corrugated outlet chute that can feed 8 lanes of the machine. • Each shaker will vibrate on 4 oscillating elements. • Each shaker has grain saving perforated holes at end of the pan body. • All sheet metal parts and chassis are made of mild steel painted. • On each shaker; There are a pair of vibration motors, each 380V, 50Hz., 0,55kw. • The electrical control...

Open the catalog to page 2
SEED CORN HUSKER - 3

Optional Metering Conveyor Shaker Feeder Section Base Husker Section Optional: Extra Height Stands SEED CORN HUSKER Model.TCH04M.16 TABANLI MAKINA SANAYI VE TICARET LIMITED SIRKETI Isabey mh. Ismetiye cd. No:153/3, 16290 YILDIRIM, BURSA / TURKEY email: info@tabanli.com

Open the catalog to page 3

All TABANLI MAKINA SAN VE TIC LTD STI catalogs and technical brochures

  1. PEA DEPODDER

    1 Pages

  2. CORN HUSKER

    2 Pages