AUTOMATIC CORN CUTTER
3Pages

Automatic feeding and orienting model for cutting sweet corn kernels with electric motor drive system. Capacity: up to 100-130 cobs/min from 75% up to 90% orientation accuracy by depending on dimension and shape of corn cobs. • • • • • • • • • • • • • • It includes one cutter head with one set of cutting knives. Corn cob feed conveyor made of polyurethane. Sensors and relays intervene jam clear system by reversing of belt and the rolls and pneumatic actuating nubbin knocking. Construction and product contact points are AISI 304 stainless steel and non-corrosive food grade materials. Water spray for cutter head. Centralized lubrication port. Electrical switch safety system. Cutter drive motor with inverter, 4kw. Metering Conveyor drive motor, 0,12kw. Infeed wheel drive motor with inverter, 0,25kw. Orienter drive motor with inverter, 0,25kw. Digital displayed ear counting system can give you datas about total ears and flow as ear per minute. Electrical and pneumatic control panel assembled. Overall Dimensions (L*W*H) : approx. 188cm*112cm*192cm TABANLI MAKINA SANAYI VE TICARET LIMITED SIRKETI Isabey mh. Ismetiye cd. No:153/3, 16290 YILDIRIM, BURSA / TURKEY

Cutter Head: Spring loaded cutter head with adjusting mechanism gives you the best kernel cutting efficiency. Technical specifications: Orientation accuracy: between 75% and 90% Average rate: 100-130 ears/minute Air requirement: approx. 1,2 m3/hr at 6 bar Water consumption: approx. 0,5 liters/minute Nubbin Knocker Pneumatic actuated and sensor controlled TABANLI MAKINA SANAYI VE TICARET LIMITED SIRKETI Isabey mh. Ismetiye cd. No:153/3, 16290 YILDIRIM, BURSA / TURKEY email: info@tabanli.com

Metering Conveyor feeds the corn ears onto Infeed wheel Infeed wheel with pneumatic actuated and spring loaded pressure arm gate feeds the corn ears onto the Orienter belt by singulating. Corn ears are conveyed by tilted conveyor belt and rotary rubber drum to the Orienter with angled tension gate. If the ear is already oriented (tip-first) correctly it will drop onto the Cutter feed conveyor as same, if oriented backwards (butt-first) the pinch point of the gate flips the ear around while dropping it onto the Cutter conveyor. TABANLI MAKINA SANAYI VE TICARET LIMITED SIRKETI Isabey mh....