TSSP-8525G-SR Optical Transceiver


Catalog excerpts

TSSP-8525G-SR Optical Transceiver - 1

TSSP-8525G-SR Optical Transceiver 850nm SFP+ Multi-mode Transceiver, With Diagnostic Monitoring Duplex SFP+ 100mTransceiver, RoHS 6 Compliant 850nm VCSEL laser and PIN photo-detector Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF Digital diagnostics functions are available via the I2C interface Operating case temperature +3.3V single power supply Power consumption less than 1W RoHS compliant Password protection for A0h and A2hRoHS6 compliant (lead free) Other optical links Absolute Maximum Rating These values represent the damage threshold of the module. Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions. Parameters Power Supply Voltage Storage Temperature Operating Case Temperature Information and specifications are subject to change without notice. Please visit www.china-tscom.com for more information. 8 Jinxiu Middle Road, Pingshan, Shenzhen, Guangdong, 518118, P. R. China +86 755 32983688 |info@china-ts

Open the catalog to page 1
TSSP-8525G-SR Optical Transceiver - 2

Relative Humidity RX Input Average Power Recommended Operating Environment Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted. Parameter Power Supply Voltage Operating Case Temperature Optical Characteristics The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified. Parameter Center Wavelength Average Optical Power Extinction Ratio Transmitter Dispersion Penalty Optical Return Loss Tolerance Receiver Center Wavelength Receiver Sensitivity...

Open the catalog to page 2
TSSP-8525G-SR Optical Transceiver - 3

Single Ended Output Voltage Tolerance C common mode voltage tolerance Tx Input Diff Voltage Receiver Single Ended Output Voltage Tolerance Rx Output Diff Voltage Transmitter Ground Transmitter Fault Transmitter Disable. Laser output disabled on high or open 2-wire Serial Interface Data Line 2-wire Serial Interface Clock Line Module Absent. Grounded within the module Loss of Signal indication. Logic 0 indicates normal operation Receiver Ground Receiver Ground Receiver Inverted DATA out. AC Coupled Receiver DATA out. AC Coupled Receiver Ground Receiver Power Supply Transmitter Power Supply...

Open the catalog to page 3
TSSP-8525G-SR Optical Transceiver - 4

the range 4.7 kΩ to10 kΩ.Mod_ABS is asserted “High” when the SFP+ module is physically absent from a host slot. [5] RS0 and RS1 are module inputs and are pulled low to VeeT with > 30 kΩ resistors in the module. Regulatory Compliance T&S SFP+ transceiver is designed to be Class I Laser safety compliant and is certified per the following standards: Feature Certificate / Comments Laser Safety CDRH 21 CFR 1040 annd Laser Notice No. 50 Product Safety Environmental protection Ordering Information Part Number Product Description Important Notice Performance figures, data and any illustrative...

Open the catalog to page 4

All T&S Communications catalogs and technical brochures

  1. 56g QSFP AOC

    4 Pages

  2. 40g QSFP AOC

    4 Pages

  3. 10g SFP AOC

    4 Pages

  4. DAC Series

    2 Pages

  5. fiber optic

    20 Pages