TSQS-PC1HG-xxM 100G QSFP28 Direct Attach Cable QSFP28 Direct Attach Cables are compliant with the SFF-8665 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of cable length (up to 5m). Up to 25.78Gbps data rate per channel Hot-pluggable QSFP+ 38 PIN footprint Compliant with IEEE 802.3bj Single 3.3V power supply RoHS compliant Low EMI radiation switches, servers and routers Data center networks Storage area networks High performance computing Telecommunication and wireless infrastructure Medical diagnostics and networking Test and measurement equipment Recommended Operation Condition Parameter Operating Case Temperature Storage Temperature Information and specifications are subject to change without notice. Please visit www.china-tscom.com for more information 8 Jinxiu Middle Road, Pingshan, Shenzhen, Guangdong, 518118, P. R. China +86 755 32983688 |info@china-tsc

Relative Humidity (non-condensation) Supply Voltage Voltage on LVTTL Input Power Supply Current Total Power Consumption Notes: Stress or conditions exceed the above range may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not applied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Frequency Domain Item Test Parameter Differential Insertion Loss (SDD12) Differential Insertion Loss...

Transmitter Inverted Data Input Transmitter Non-Inverted Data Input Module Select Module Reset +3.3 V Power supply receiver 2-wire serial interface clock 2-wire serial interface data Receiver Non-Inverted Data Output Receiver Inverted Data Output Receiver Non-Inverted Data Output Receiver Inverted Data Output Receiver Inverted Data Output Receiver Non-Inverted Data Output Receiver Inverted Data Output Receiver Non-Inverted Data Output Module Present +3.3 V Power supply transmitter Transmitter Non-Inverted Data Input Transmitter Inverted Data Input Information and specifications are subject to...

Transmitter Non-Inverted Data Input Transmitter Inverted Data Input Mechanical Dimensions The connector is compatible with the SFF-8665 specification. Information and specifications are subject to change without notice. Please visit www.china-tscom.com for more information 8 Jinxiu Middle Road, Pingshan, Shenzhen, Guangdong, 518118, P. R. China +86 755 32983688 |[email protected] | www.china-tscom.com

Mechanical Specifications Parameter Within Pair Skew Cable Insertion Loss Bulk Cable Time Delay Bulk Cable Impedance Insertion Force Withdrawal Force Retention Force Data Rate Length Tolerance Ordering Information Information and specifications are subject to change without notice. Please visit www.china-tscom.com for more information 8 Jinxiu Middle Road, Pingshan, Shenzhen, Guangdong, 518118, P. R. China +86 755 32983688 |[email protected] | www.china-tscom.com