TSQS-CW1HG-02LC Optical Transceiver
5Pages

TSQS-CW1HG-02LC Optical Transceiver QSFP28 CWDM4 2km Transceiver, With Diagnostic Monitoring Link budget assumes the use of KR4 FEC by the host Uncooled CWDM DFB lasers, directly modulated Electrical interface: retimed CAUI-4 per 100G Ethernet IEEE 802.3bm Annex 83E User controllable Transmit Input Equalization and Receiver Output Amplitude MSA-compliant performance monitoring via I2C interface Fiber connector: SMF LC duplex connector RoHS6 compliant (lead free) Description The QSFP28 100G-CWDM4-2km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. It is compliant with the 100G 4WDM-10 MSA, which is based on the CWDM4 MSA version 1.1. It is interoperable with CWDM4 transceivers over a 2 km reach. Information and specifications are subject to change without notice. Please visit www.china-tscom.com for more information. 8 Jinxiu Middle Road, Pingshan, Shenzhen, Guangdong, 518118, P. R. China +86 755 32983688 |info@china-tscom

Optical Transmitter Performance Parameter Side Mode Suppression Ratio Average launch power, each lane Optical Modulation Amplitude (each lane) Transmitter Reflectance Extinction Ratio Total average launch power Average launch power of OFF transmitter, each lane Optical return loss tolerance Center Wavelength Launch power in OMA minus TDP, each lane Transmission & dispersion penalty, each lane Optical Receiver Performance Parameter Center Wavelength Receiver Reflectance Vertical eye closure penalty, each lane Stressed eye J2 Jitter, each lane Stressed eye J9 Jitter, each lane Information and...

Stressed eye J4 Jitter, each lane Damage threshold, each lane Recommended Operating Environment Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted. Parameter Power Supply Voltage Operating Case Temperature Transmitter Inverted Data Input Transmitter Non-Inverted Data Input Transmitter Inverted Data Input Transmitter Non-Inverted Data Input Module Select Module Reset +3.3 V Power supply receiver 2-wire serial interface clock 2-wire serial interface data Receiver Non-Inverted Data Output Receiver Inverted...

+3.3 V Power supply transmitter Transmitter Non-Inverted Data Input Transmitter Inverted Data Input Transmitter Non-Inverted Data Input Transmitter Inverted Data Input Ordering Information Part Number Product Description Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In Information and specifications are subject to change without notice. Please visit www.china-tscom.com for more information. 8 Jinxiu Middle...

accordance with the T&S policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative. Information and specifications are subject to change without notice. Please visit www.china-tscom.com for more information. 8 Jinxiu Middle Road, Pingshan, Shenzhen, Guangdong, 518118, P. R. China +86 755 32983688 |info@china-tscom.com | www.china-tscom.com