TSQS-8540G-04MC Optical Transceiver
4Pages

TSQS-8540G-04MC Optical Transceiver QSFP+ 40G SR4 400m Transceiver, With Diagnostic Monitoring 4 channels full-duplex transceiver modules Transmission data rate up to 10.5Gbps per channel 4 channels 850nm VCSEL array 4 channels PIN photo detector array Hot-pluggable QSFP form factor Maximum link length of 300m on OM3 Multimode Fiber(MMF) and 400m on OM4 MMF Single 1X12 MPO connector receptacle Hot-pluggable electrical interface RoHS6 compliant (lead free) Datacom/Telecom switch & router connections Data Aggregation and Backplane Applications Proprietary Protocol and Density Applications Description The QSFP+ 40G-SR4-400m module is a highly integrated 4x10G transceiver focused on reach, bandwidth, density and cost for highport-count 40G systems, and client-side 40G interfaces. Each lane can operate at 10.3125Gbps up to 300m using OM3 fiber or 400m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38-contact edge type connector. The optical interface uses a 12-fiber MTP/MPO connector. Information and specifications are subject to change without notice. Please visit www.china-tscom.com for more information. 8 Jinxiu Middle Road, Pingshan, Shenzhen, Guangdong, 518118, P. R. China +86 755 32983688 |info@china

Optical Transmitter Performance Parameter Signaling Speed per Lane Center Wavelength Average Launch Power per Lane Difference in launch power between any two lanes (OMA) Peak Power per Lane Launch Power [OMA] minus TDP per Lane Extinction Ratio Optical Return Loss Tolerance Encircled Flux Average launch power of OFF transmitter, each lane Optical Receiver Performance Parameter Signaling Speed per Lane Center Wavelength Damage Threshold Average receive power, each lane Unstressed Receiver Sensitivity (OMA) per Lane Stressed Receiver Sensitivity (OMA) per Lane Vertical eye closure penalty,...

Recommended Operating Environment Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted. Parameter Power Supply Voltage Operating Case Temperature Transmitter Inverted Data Input Transmitter Non-Inverted Data Input Transmitter Inverted Data Input Transmitter Non-Inverted Data Input Module Select Module Reset +3.3 V Power supply receiver 2-wire serial interface clock 2-wire serial interface data Receiver Non-Inverted Data Output Receiver Inverted Data Output Receiver Non-Inverted Data Output Receiver Inverted...

Transmitter Non-Inverted Data Input Transmitter Inverted Data Input Ordering Information Part Number Product Description Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further...