TSQS-851HG-01MC Optical Transceiver QSFP28+ 100G SR4 100m Transceiver, With Diagnostic Monitoring 4 channels full-duplex transceiver modules Transmission data rate up to 25Gbps per channel 4 channels 850nm VCSEL array 4 channels PIN photo detector array Hot-pluggable QSFP28 form factor Maximum link length of 70m on OM3 Multimode Fiber(MMF) and 100m on OM4 MMF Single 1X12 MPO connector receptacle Hot-pluggable electrical interface RoHS6 compliant (lead free) Description The QSFP28 100G-SR4-100m module is a highly integrated 4x25G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. Each lane can operate at 25Gbps up to 70m using OM3 fiber or 100m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38-contact edge type connector. The optical interface uses a 12-fiber MTP/MPO connector. Information and specifications are subject to change without notice. Please visit www.china-tscom.com for more information. 8 Jinxiu Middle Road, Pingshan, Shenzhen, Guangdong, 518118, P. R. China +86 755 32983688 |[email protected]

Optical Transmitter Performance Parameter Signaling Speed per Lane Center Wavelength Average Launch Power per Lane Launch Power [OMA] minus TDEC per Lane Extinction Ratio Optical Return Loss Tolerance Encircled Flux Average launch power of OFF transmitter, each lane Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3} Optical Receiver Performance Parameter Signaling Speed per Lane Center Wavelength Damage Threshold Average receive power, each lane Stressed Receiver Sensitivity (OMA) per Lane Vertical eye closure penalty, each lane Stressed eye J2 jitter, per Lane Stressed eye J4 jitter, per...

GND Tx2n Tx2p GND Tx4n Tx4p GND ModSelL ResetL Vcc Rx SCL SDA GND Rx3p Rx3n GND Rx1p Rx1n GND GND Rx2n Rx2p GND Rx4n Rx4p GND ModPrsL IntL Vcc Tx Vcc1 LPMode GND Tx3p Tx3n GND Tx1p Tx1n GND Ground Transmitter Inverted Data Input Transmitter Non-Inverted Data Input Ground Transmitter Inverted Data Input Transmitter Non-Inverted Data Input Ground Module Select Module Reset +3.3 V Power supply receiver 2-wire serial interface clock 2-wire serial interface data Ground Receiver Non-Inverted Data Output Receiver Inverted Data Output Ground Receiver Non-Inverted Data Output Receiver Inverted Data Output...

Ordering Information Part Number Product Description Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative. Information and...