SYS-CLEAN© STC1.0

Product catalog summary

Product Overview:
SYS-CLEAN© STC1.0 is a water-based cleaning medium designed for cleaning SMT stencils at room temperature. It effectively removes solder pastes and misprints and can be used in various cleaning processes including spray, immersion, and ultrasonic systems.

Application Suitability:

Solder pastes
SMT adhesive or conductive adhesive
Flux
Oils/fats

Specifications:

Delivered as a ready-to-use mix
pH-Value: 7.7
Density (at 20°C): 0.9995 g/cm³
Refractive Index (at 20°C): 1.3522
Initial boiling point and boiling range: >100 °C
Flashpoint: Not Applicable

Application Parameters:

Application temperature: 20°C
Cleaning duration: approx. 4-6 min
Rinsing: STC1.0 / DI-Water
Drying: convection / compressed air
Application Concentration: ready-to-use

Advantages:
SYS-CLEAN© STC1.0 is highly filterable with optimized discharge behavior, reducing consumption and preventing oily residues. Its high loading capacity ensures cost-effectiveness, and it can be used in underside cleaning without issues.

Availability:

1L (Item number: 64904042)
5L (Item number: 64903565)
25L (Item number: 64903511)
200L (Item number: 64903512)

Compliance:
The product is free of questionable ingredients according to the SIN- & SVHC-Lists and is 100% compliant with EU guidelines RoHS 1 & 2, WEEE.

Application Methods:

Spray-in-air
Immersion cleaning air agitated
Spray under Immersion
Ultrasonic
Manual cleaning

Catalog excerpts

SVSTRONIC felStencil cleaner - ready-to-use SYS-CLEAN© STC1.0 is a water-based cleaning medium for cleaning SMT stencils already at room temperature. SYS-CLEAN© STC1.0 reliably cleans solder pastes from stencils and misprints.The cleaner can be used in spray processes as well as in immersion or ultrasonic systemswill be.

Open the catalog to page 1

SYS-CLEAN© STC1.0Stencil cleaner - ready-to-use Application y/ = Excellent ^ = Optimal Q = Optional ^H= Not recommended Advantages: SYS-CLEAN© STC1.0 is very well filterable and has an optimized discharge behaviour which reduces consumption and prevents oily residues. The high loading capacity ensures a particularly cost-effective process. Since the medium does not separate, use in underside cleaning is possible without problems. Availability: SYS-CLEAN© STC1.0 Ready-to-use is available in the following sizes Item number: 64904042 - 1L Item number: 64903565 - 5L Item number: 64903511 -25L Item...

Open the catalog to page 2

SYS-CLEAN© STC1.0

SYS-CLEAN© STC1.0

Catalog excerpts

All SYSTRONIC Produktionstechnologie GmbH & Co. KG catalogs and technical brochures