MEMS Quartz Angular Rate Sensor Ideal for High Performance Commercial & Industrial Applications: • • • • • • Platform Stabilization Optical Camera Stabilization Antenna Stabilization & Pointing High Speed Ride & Tilt Control Robotic Control Instrumentation Exceptional Bias Stability Low Gyro Noise Improved Vibration Performance DC Voltage Input/High-Level Analog DC Voltage Output Rugged Construction in a Very Small Form Factor High Reliability & Long Life RoHS Compliant The SDG1400 is a single-axis angular rate sensor that provides exceptional performance with Systron Donner Inertial’s proven Quartz MEMS sensing element and fully self-contained electronics. By applying design techniques found only in more expensive rate sensors, excellent Bias Stability, Temperature Performance, Noise, and Vibration performance levels have been achieved. The availability of the internal temperature sensors enable bias modeling.

MEMS Quartz Angular Rate Sensor Power Requirements Input Voltage Input Current + and – 10 to 16 Vdc < 15 mA (each supply, typical) Performance Standard Range Full Scale Full Scale Output (Nominal) Scale Factor (at 25°C) Scale Factor Over Temperature Bias Calibration (at 25°C) Bias Variation over Temperature Bias Stability (In-Run at Constant Temp., Std. Dev.) G Sensitivity Start-Up Time Bandwidth (-90°, incl. temp. effect) Damping Ratio Non-Linearity, (% Full Range) Output Noise (DC to 100 Hz) ≤ 1 deg/sec. ≤ 1 deg/sec. < 6°/hr. typical < 36°/hr/g ≤ 1.0 sec 50 ± 10 Hz 0.7 ± 0.2 ≤ 0.03% ≤ 0.1°/√hr...