1. Catalogs
  2. Systron Donner Inertial
  3. MMQ50 Inertial Measurement Units

MMQ50 Inertial Measurement Units

MMQ50 Inertial Measurement Units

MMQ50 Inertial Measurement Units

Product catalog summary
Overview: The document describes the Miniature MEMS Quartz IMU (MMQ™50), a high-precision inertial measurement unit designed for both civil and military applications. It is suitable for general aviation, unmanned vehicles, land navigation, EO/IR stabilization, antenna pointing, tactical missiles, smart munitions, and robotics.
Key Performance Features: The MMQ™50 is characterized by its extremely small size, low power consumption, and very light weight. It operates on DC voltage input and is designed for embedded applications with an RS-232 digital interface. It is suitable for environments compliant with DO-160D standards.
Technical Specifications:
  • Physical Characteristics: Volume is less than 9 cubic inches, weight is under 0.50 lbs (0.227 kg), and power consumption is less than 5W with a + & – 12Vdc input.
  • Rate Channels: Range of 200°/sec, bias stability of ≤100°/hr, bias instability between 4-15°/hr, angle random walk of 0.3°/√hr, and scale factor error of ≤5000 ppm.
  • Acceleration Channels: Range of ±10g, bias stability of ≤2.5 mg, velocity random walk of 0.5 mg/√Hz, and scale factor error of ≤5000 ppm.
  • Environmental Conditions: Operating temperature range from -54°C to +70°C, vibration resistance of 6.0grms, shock resistance of 30g, and altitude capability up to 35,000 ft, all meeting DO-160D standards.
Contact Information: For more details, contact Systron Donner Inertial at their Concord, CA location or via their website.
See more

Catalog excerpts

MMQ50 Inertial Measurement Units-1

Miniature MEMS Quartz IMU Ideal for High-Precision Civil & Military Applications: • • • • • • • • General Aviation Unmanned Vehicles Land Navigation EO/IR Stabilization Antenna Pointing Tactical Missiles Smart Munitions Robotics Extremely Small Size Low Power Consumption Very Light Weight DC Voltage Input Designed for Embedded Applications RS-232 Digital Interface Suitable DO-160D Physical Environment The Miniature MEMS Quartz IMU (MMQ™ ™50) is a small (less than 9 cubic inch) inertial measurement unit capable of ) providing bias instability values below 10 deg/hr and angle random walk typically below 0.15 deg/square root hour. The MMQ™50 combines tremendous performance and versatility with an extremely compact size, low power consumption and very low weight.

 Open the catalog to page 1
MMQ50 Inertial Measurement Units-2

Miniature MEMS Quartz IMU Size (Vol.) Weight Power I/O Rate Channels Range Bias Turn-on to turn-on Stability (fixed temp) Bias In-run Stability (at any temperature) Bias Instability Angle Random Walk Scale Factor error Alignment Bandwidth (-90° Phase Shift) Acceleration Channels Range Bias Turn-on to turn-on Stability (fixed temp) Bias In-run Stability (at any temperature) Velocity Random Walk Scale Factor Error Alignment Bandwidth (-90° Phase Shift) Environmental Temperature Range Vibration, Random Shock, Operating Altitude -54° to +70° (operating) C C 6.0grms, 20Hz –2kHz, flat Meets DO-160D...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.