1. Catalogs
  2. SYSTEM DI ROSATI
  3. TDS - Linear actuator type PE40GE (ENCODER)

TDS - Linear actuator type PE40GE (ENCODER)

TDS - Linear actuator type PE40GE (ENCODER)

Product catalog summary
Specifications:
  • Models: PE40-25GE, PE40-35GE, PE40-50GE, PE40-100GE
  • Rated Power Supply: 12V and 24V
  • Absorbed Current Without Load: 0.14A (12V), 0.07A (24V)
  • Absorbed Current With Max Load: 0.66A (12V), 0.33A (24V)
  • Max Power: 8W
  • Max Stroke: 25mm to 100mm
  • Max Force of Traction/Thrust: 140N
  • Traversing Speed Without Load: 5.8 mm/sec (Type A), 11.6 mm/sec (Type B)
  • Operating Temperature: -5°C to +60°C
  • Protection Degree: IP65
  • Total Weight: 0.610kg to 0.735kg
Procedures and Connections:
  • Connections: 6 wires for motor power supply and encoder outputs
  • Encoder Types: Unidirectional and Bidirectional
  • Hall-Effect Switches: Six-pole magnet with 3 pulses per motor revolution
  • Max Motor Speed Without Load: 6380 RPM
  • Supply Voltage for Encoder: 4.5 to 12 VDC
  • Max Supply Current: 20 mA
  • Cable Specifications: 2 x 0.5 mm², ~200 mm length
Dimensions:
  • PE40-25GE: A=77, B=73, C=176, D=98
  • PE40-35GE: A=87, B=83, C=186, D=118
  • PE40-50GE: A=102, B=98, C=201, D=148
  • PE40-100GE: A=152, B=148, C=251, D=248
Notes:
  • Service ED% depends on operating conditions such as temperature and load.
  • System di Rosati reserves the right to modify dimensions and characteristics without notice.
See more

Catalog excerpts

TDS - Linear actuator type PE40GE (ENCODER)-1

ELECTRIC PISTON TYPE PE40GE RUBBER DUST COVER REPLACEMENT CODE: 4000009 N.B. PE40-100G WITHOUT RUBBER No 3 U. ENCODER CABLES No 4 B. ENCODER CABLES CABLE LENGTH ~200 mm CONNECTIONS: 1 RED +MOTOR POWER SUPPLY 2 BLACK -MOTOR POWER SUPPLY 3 BLUE O.C. OUTPUT A 4 GREEN GND 5 BROWN VDC INPUT HALL 6 YELLOW O.C. OUTPUT B ( BIDIRECTIONAL ONLY ) UNIDIRECTIONAL ENCODER EXTENSION POSITION BIDIRECTIONAL ENCODER HALL-EFFECT SWITCHES SIX-POLE MAGNET No OF PULSES FOR MOTOR REVOLUTION: 3 MAX SPEED OF MOTOR REVOLUTION WITHOUT LOAD: 6380 RPM SUPPLY VOLTAGE: 4.5+12 VDC MAX SUPPLY CURRENT: 20 mA D SYSTEM ROSATI s.r.l. ViaVeneto,22 60030 MONSANO (ANCONA) ITALY Tel.++39.0731.605631 Fax.++39.0731.605641 www.systBmrosae.COT E-mail: [email protected]

 Open the catalog to page 1

All SYSTEM DI ROSATI catalogs and technical brochures

  1. CATALOGUE

    73  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.