- Catalogs
- SYSTEM DI ROSATI
- TDS - Electromagnet type CI
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
TDS - Electromagnet type CI
1 / 1 PageView full catalog
TDS - Electromagnet type CI
Product catalog summary
Electromagnet Type CI Overview
This document provides technical specifications for the Electromagnet Type CI, including optional features such as a return spring and rear output with IP40 protection. The document covers four models: CI45, CI60, CI80, and CI100.
Specifications
Dimensions
The document provides detailed dimensions for each model, including diameter, length, and mounting specifications.
Important Notes
Connections
The document includes a schematic for coil connections, indicating common and pull coil connections.
This document provides technical specifications for the Electromagnet Type CI, including optional features such as a return spring and rear output with IP40 protection. The document covers four models: CI45, CI60, CI80, and CI100.
Specifications
- Rated Power Supply: All models operate at 12/24 V.
- Pull Coil Absorption at 20°C: Ranges from 15 A to 42.8 A depending on the model.
- Pull Coil Power at 20°C: Ranges from 360 W to 523 W.
- Hold Coil Absorption at 20°C: Ranges from 0.3 A to 0.7 A.
- Hold Coil Power at 20°C: Ranges from 7.2 W to 8.8 W.
- Coil Insulation Class: All models are Class H.
- Working Stroke: 45 mm for all models.
- Start Stroke Force Without Spring at 20°C: Ranges from 25 N to 150 N.
- Holding Force Without Spring at 20°C: Ranges from 210 N to 770 N.
- Spring Preload and Loading: Varies by model, with preload ranging from 5 N to 50 N and loading from 36 N to 230 N.
- Protection Degree: IP45 for all models.
- Total Weight: Ranges from 0.900 kg to 6.300 kg.
Dimensions
The document provides detailed dimensions for each model, including diameter, length, and mounting specifications.
Important Notes
- The force values are based on a single work cycle at 20°C.
- Any variation in the specified data can affect other parameters.
- System Di Rosati reserves the right to modify dimensions and characteristics without notice.
Connections
The document includes a schematic for coil connections, indicating common and pull coil connections.
See more
Catalog excerpts
OPTIONAL REAR OUTPUT IP40 TYPE CI60 FEMALE THREAD M6 x 15 ELECTROMAGNET TYPE CI EXCITATION RETURN SPRING PULL COIL THE FORCE INDICATED ABOVE REFER TO A SINGLE WORK CYCLE AT A TEMPERATURE OF 20°C. THE ABOVE DATA IS STRICTLY RATED; A VARIATION IN ANY OF THE DATA LEADS TO A CONSEQUENT VARIATION IN ALL OTHER DATA. SYSTEM DI ROSATI RESERVES THE RIGHT TO MAKE CHANGES TO THE DIMENSIONS AND CHARACTERISTICS DESCRIBED ON THIS DATA SHEET WITHOUT PRIOR NOTICE. SYSTEM ROSATI s.r.l. ViaVeneto,22 60030 MONSANO (ANCONA) ITALY Tel.++39.0731.605631 Fax.++39.0731.605641 wflW5ystemrosatj.com E-mail: [email protected]
Open the catalog to page 1All SYSTEM DI ROSATI catalogs and technical brochures
CATALOGUE73 Pages
Catalogue linear electromagnets22 Pages
Catalogue water heaters7 Pages
Catalogue contact heaters5 Pages
General catalogue52 Pages
Brochure S.FC.P.CB2 Pages
Related Searches
- Actuator
- Linear actuator
- Electric actuator
- Compact actuator
- Industrial actuator
- Solenoid
- Heater
- Linear encoder
- Double-acting actuator
- Linear solenoid
- DC solenoid
- Control actuator
- Absolute linear encoder
- Liquid heater
- Voltage solenoid
- Compact solenoid
- IP65 actuator
- Holding solenoid
- 24-volt solenoid
- Electromagnetic solenoid
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.