MM500 Moisture analyser for corrosive gases Accurate and reliable, on-line trace moisture analyser for Chlorine, Hydrogen Chloride and other corrosive gases in safe or hazardous area locations This sample system works in conjunction with our range of MM500 analysers for moisture measurement in corrosive gases. • Autoranging from 0.01ppm to 1000ppm • RS232/485 outputs • ppmv, Dewpoint °C and °F units • Sample system IP65/Nema 4 Designed specifically for corrosive gases, the MM500 Sample System allows safe, accurate and reliable analysis of moisture in corrosive gas mixtures. The MM500 Moisture Analysers represent the latest advance in moisture analysis - designed to be customised to your application giving precise measurements while providing a simple, yet affordable analyser. All instruments in the range incorporate microprocessor control, with our high quality electrolytic moisture sensor, to bring flexibility to your process environment. • No calibration required • Inert gas purge • Fault alarm • Corrosion resistant materials throughout These analysers provide an absolute measurement, with accurate dependable results over a wide range from 0.01ppm to 1000ppm. Unit of measurement can be selected from ppmv or dew point (°C or °F). Sample wetted parts are made from corrosion resistant materials throughout. All non-wetted brackets and materials are stainless steel. Simply select the instrument configuration and sensor location and let the analyser do the rest.

Rack Mount 4U - 19 inch Houses 1 or 2 analysers 178H x 484W x 410D (mm) 9.7kg (single unit) Technical Specifications Measurement Ranges Accuracy Autoranging from 0.01ppm to 1000ppm and equivalent in Dew Point Other ranges are available with limited accuracy, please consult factory ±5% of reading or 0.4 ppm(v) Response Time Selectable Units ppm(v) / Dew Point °C / Dew Point °F Display Type 5 digit high visibility LED Operating Conditions Sample and ambient temperature: 0–40°C (32–104°F) Sample Connections Maximum Sample Pressure 0.7 – 8.3 Barg Sample Flow Power Requirements Acceptable Gases Chlorine/HCI...