EC92DIS Portable Oxygen Analyser Trace and Percentage (ATEX approved) Suitable for Hazardous Environments Applications Offshore Chemical plants Hydrogen plants Pharmaceutical plants Inert atmospheres and cylinder gas analysis in hazardous area Features & Benefits Unique fast purge system Intrinsically safe certification Maintenance-free measuring cell Easy calibration This instrument has a 36 month warranty which covers any faulty workmanship and normal component failure relating to electronic circuit cards The EC92DIS portable oxygen analyser will detect levels of oxygen as low as 1ppm, up to high percent levels and can be used on most industrial gases and atmospheres. There is no need for routine maintenance of the fuel cell, and the instrument may be easily calibrated, using ambient air or standard calibration samples. Unique fast purge system The innovative design of the fast purge/cell seal system means readings of single digit parts per million oxygen can be obtained within a few minutes. Apart from a single switch, no adjustments or controls are necessary, making the unit ideal for use by non-technical personnel. Operation of the EC92DIS is made easy by the internal sample system. Taking gas measurements is simply a matter of connecting the gas line, purging for a short time and switching a valve position. When not in use the cell is sealed. Approved by BASEEFA and CENELEC to ATEX

The digital display is easily visible in sunlight or low level light; can display readings below 1 part per million and indicate low battery power. A calibration adjustment on the front panel can be set to give a reading of 20.9% when the analyser is working on clean air. Using this method ensures that the instrument will be absolutely accurate on any selected part of its operational range. If calibration of trace levels is required, certified calibration gas may be used. Each sensor is individually tested to meet stringent performance specifications. The micro-fuel cell is sealed and is simply replaced...