Catalog excerpts
R OT ARY HAPTI C MO DU L E D HM 3 Rotary haptic measuring systems are used to test rotary actuators in the automotive and consumer sector to record and evaluate their haptic torque curves. The surrounding housing protects the system from external influences and protects the user from moving parts, so that the module can be used without a safety enclosure. The housing is matt black and is therefore particularly suited for the use beside image processing systems. Compensation of radial deviation One special feature of the system consists in its high tolerance to radial offset between module and rotary actuator. This offset may be up to 0.5 mm in each direction without negatively affecting the measuring result. As a result of this, it is not necessary to elaborate fine adjustment of the rotary actuator. Integrated encoder The system has an integrated encoder for exact allocation of torque and angle of rotation. Technical Data Measuring range [mNm] Resolution measurement range [bit] The rotary haptic module DHM 3 is a measuring system that has been specially developed for this purpose. It can be easily integrated in automatic and laboratory systems. Nominal angular velocity [°/s] The measuring range of ± 100 mNm and an integrated overload protection to prevent excessive torques allow to record the torque curves of all conventional rotary actuators. The module can be combined with the various gripper variations in the DHG3 series for adjustment to special requirements in terms of rotary actuator geometry. An integrated electric drive opens and closes the gripper. The module is designed for a minimum service life of 10 million measuring cycles. Dimensions without gripper [mm] SYSTEC Gesellschaft für Automatisierung, Systeme und Technische Dokumentation mbH Schreiberhauer Str. 5 | 90475 Nürnberg | Tel: +49 (0)911-998955-0 | Fax: +49 (0)911-998955-633 info@systec-gmbh.
Open the catalog to page 1R OT ARY HAPTI C MO DU L E D HM 3 Control and evaluation Automatic operation For operation, the rotatory haptic module must be always connected with a PC or an industrial PC. The DHM 3 is used for data acquisition. The evaluation of the data is done with a special software on the PC. The DHM 3 has two operating modes: The automation software SYSTEC Testsequenzer enables integration in automated plants. Besides evaluation and execution of variant - specific checklists for connection to a database, the software is perfectly suitable for documentation of the tests. Furthermore it is...
Open the catalog to page 2All Systec Gesallschaft für Automatisierunt und Testsysteme mbH catalogs and technical brochures
-
DTN 38
1 Pages