*mydirectindustry

IPC/SIC4

1 / 1 PageView full catalog

IPC/SIC4

Product catalog summary

Specifications

Main Functional Elements: The board features 4 standard UARTs compatible with 16C550, equipped with 64-byte FIFOs. It supports configurable drivers for RS232, RS422, and RS485 with options for full duplex, half duplex, echo cancellation, and TLS. Interface, interrupt, and base address configurations are adjustable via switches. The board includes a PC/104 local bus interface and offers full galvanic isolation for separate interfaces.
Maximum Ratings: The board operates with a logic supply current of 500mA at 5V without external load. It supports an operating temperature range from -25°C to +85°C and a storage temperature range from -40°C to +90°C.
Board Size: The dimensions are 100 x 125 mm, which are non-standard for PC/104 mechanical dimensions.

Interface Configurations

RS232 Interfaces: The board provides 4 RS232 interfaces without galvanic isolation, featuring four 2x5 pin headers for direct flat cable DSUB connection. Supported signals include RX, TX, RTS, CTS, DTR, DSR, DCD, and RI. Order codes are IPC/SIC4-1AE for PC/104 connector and IPC/SIC4-1ASE for 32x4 pin ELCO connector.
Configurable RS232/422/485 Interfaces: These interfaces come with galvanic isolation and are available with four 2x5 pin headers for DSUB connection. Supported RS232 signals are RX, TX, RTS, and CTS. Order codes are IPC/SIC4-1BE for PC/104 connector and IPC/SIC4-1BSE for 32x4 pin ELCO connector.
Additional Configurations: A version with a 36-pin terminal block connector and four 2x5 pin headers for DSUB connection is available, supporting the same RS232 signals. Order codes are IPC/SIC4T-1BE for PC/104 connector and IPC/SIC4T-1BSE for 32x4 pin ELCO connector. Other configurations are available upon request.

Catalog excerpts

Serial Interfaces Board - based on PC/104 Standard IPC/SIC4-1 4 Standard UARTs Configurable Drivers Selectable Interrupt Addresses Galvanic Isolation ESD Protected Extended Temperature Specifications Main Functional Elements 4 Standard UARTs, 16C550 Compatible but with 64 Bytes FIFOs Configurable Standard RS232 / RS422 / RS485 Drivers (Full Duplex, Half Duplex, Echo Cancellation, TLS) Interface Configuration Switches Interrupt Selection Switches Board Base Address Selection Switches Full Separate Galvanic Isolated Interfaces PC/104 Local Bus Interface Please refer to User Documentation for Additional Information: DOC/IPC_SIC41A-E Order Information Maximum Ratings 4 x RS232 Interfaces without Galvanic Isolation Four 2x5 Pin Headers for direct Flat Cable DSUB Connection Supported RS232 Signals: RX/TX/RTS/CTS/DTR/DSR/DCD/RI Order Code: IPC/SIC4-1AE (PC/104 - Connector) Order Code: IPC/SIC4-1ASE (32x4 Pin ELCO Connector) 500mA Logic Supply Current @ 5V (no external Load) -25° to +85°C Operating Temperature -40° to +90°C Storage Temperature Board Size 100 x 125 mm Non standard PC/104 mech. dimensions 4 x Configurable RS232/422/485 Interfaces with Galvanic Isolation Four 2x5 Pin Headers for direct Flat Cable DSUB Connection Supported RS232 Signals: RX/TX/RTS/CTS Order Code: IPC/SIC4-1BE (PC/104 - Connector) Order Code: IPC/SIC4-1BSE (32x4 Pin ELCO Connector) 4 x Configurable RS232/422/485 Interfaces with Galvanic Isolation 36 Pin Terminal Block Connector and four 2x5 Pin Headers for DSUB Connection Supported RS232 Signals: RX/TX/RTS/CTS Order Code: IPC/SIC4T-1BE (PC/104 - Connector) Order Code: IPC/SIC4T-1BSE (32x4 Pin ELCO Connector) Other Configurations on Request Technical Data

Open the catalog to page 1

All Syslogic GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list