user documentation Revision Date Author Modification 1.1_23.12.2013 R. Newbould_Bat. life time, safety and power supply added

1PC/SL71 xxx-xxxE: user documentation DOC/COMPACT71-SLE; V1.2 © Syslogic Datentechnik AG, Baden-Daettwil, Switzerland, http://www.syslogic.com

1PC/SL71 xxx-xxxE: user documentation DOC/COMPACT71-SLE; V1.2 3.2.1. General memory layout and configuration 25 3.5. Intel Platform Controller Hub EG20T 30 © Syslogic Datentechnik AG, Baden-Daettwil, Switzerland, http://www.syslogic.com

1PC/SL71 xxx-xxxE: user documentation DOC/COMPACT71-SLE; V1.2 © Syslogic Datentechnik AG, Baden-Daettwil, Switzerland, http://www.syslogic.com

1PC/SL71 xxx-xxxE: user documentation DOC/COMPACT71-SLE; V1.2 Tab. 5 Physical Memory Address Space Layout for IPC/SL71 25 Tab. 6 I/O address space layout 28 Tab. 11 DDC programming header J18 33 Tab. 14 LDDC programming header P4 34 © Syslogic Datentechnik AG, Baden-Daettwil, Switzerland, http://www.syslogic.com

1PC/SL71 xxx-xxxE: user documentation DOC/COMPACT71-SLE; V1.2 Tab. 17 CFast Connector P27(SATA Channel 0) Tab. 18 SATA Data Connector P8 (SATA Channel 1) Tab. 19 SATA Power Connector P9 Tab. 20 SATA Connector P26 (SATA Channel 1) Tab. 29 Serial port COM5 (half duplex, RS485) on P30 Tab. 30 Serial port COM5 (full duplex, RS485) on P30 Tab. 33 Serial port COM 6(half duplex, RS485) on P31 Tab. 34 Serial port COM6 (full duplex, RS485) on P31 Tab. 39 USB device P22 (on bottom side of the PCB) Tab. 40 Ethernet twisted pair interface connector P17, P18 and P19 Tab. 42 SMBus...

1PC/SL71 xxx-xxxE: user documentation DOC/COMPACT71-SLE; V1.2 0 syslogic Tab. 61 Pin assignment of CAN interface: CAN1 at P30 / CAN2 at P31 Tab. 62 CAN interfaces 1 and 2 on J21 and J22 Tab. 66 IPC/SL71 CAN Specific System Registers Tab. 68 Power connector pinout Tab. 69 Weidmuller power connector Tab. 71 Maximum cable length of all interfaces Tab. 72 General absolute maximum ratings Tab. 73 General recommended operating conditions Tab. 74 General electrical characteristics Tab. 75 General switching characteristics Tab. 78 Hardware revision state Tab. 79 BIOS...

1PC/SL71 xxx-xxxE: user documentation DOC/COMPACT71-SLE; V1.2 © Syslogic Datentechnik AG, Baden-Daettwil, Switzerland, http://www.syslogic.com

General remarks The content and presentation of this document has been carefully checked. No responsibility is accepted for any errors or omissions in the documentation. Note that the documentation for the products is constantly revised and improved. The right to change this documentation at any time without notice is therefore reserved. Syslogic is grateful for any help referring to errors or for suggestions for improvements. The following registered trademarks are used: IBM-PC, PC/AT, PS/2 trademarks of IBM Corporation 2 IC trademark of Philips Corporation CompactFlash trademark of SanDisk...

– IEEE 996: IEEE standard document ‘Personal Computer Bus Standard’ – IEEE 996.1: IEEE standard document ‘Compact Embedded-PC Modules’ The PC/104 Specification may be downloaded from the Internet (see address below). – PC/104 Consortium www.pc104.org The IEEE standard documents may be ordered directly from the IEEE or any standards document distributor (see addresses below). – IEEE Standards Department www.ieee.org – ‘ISA & EISA, Theory and Operation’ by Edward Solari (Annabooks, San Diego), ISBN 0 -929392-15-9 – ‘PCI System Architecture’ by Tom Shanley / Don Anderson (Mindshare, Inc.), ISBN...

In case of uncertainty or of believed errors in the documentation please immediately contact the manufacturer (address see chapter 11). Do not use or install the products if you are in doubt. In any case of misuse of the products, the user is solely liable for the consequences. Important note Ensure that the power supply is disconnected from the device before working on the device (connecting interfaces, replacing flash cards, batteries, opening the enclosure, etc.). Important note Please read the safety instructions of the power supply before installing/connecting the device. Important note...

Electro-static discharge Electronic boards are sensitive to Electro-Static Discharge (ESD). Please ensure that the product is handled with care and only in an ESD protected environment. Otherwise a proper operation is not guaranteed and the warranty is not applicable. Life cycle information 1.9.1. Transportation and storage During transportation and storage the products must be in their original packing. The original packing contains a box with antistatic and shockabsorbing material. It is recommended, to keep the original packing in case of return of the product to the factory for repair. Note...

The IPC/SL71 contains an enclosure and the IPC/BL71 motherboard. A list of main features can be found in the table below: 2.2.1. CPU core Intel Atom E680T (Tunnelcreek) single core processor for mobile devices industrial temperature range (-40..+85C) IA32 processor based on Intel’s 45nm Hi-k metal gate silicon technology Multiple micro-ops per instruction are combined into one micro-op and executed in a single cycle in-order execution core high performance 32-bit 16-stage pipeline energy efficient branch prediction 1.6GHz processor clock 32kB, 4-way instruction and 24kB, 6-way data L1 cache with...

2.2.5. Integrated peripherals – integrated peripheral controller (IPC) with PC/AT compatible DMA controllers (2 x 8237), interrupt controllers (2 x 8259) and timer/counter channels (8254) – hardware watchdog configurable for 100 ms or 1.6 s timeout, hardware reset activation – temperature supervisor for software controlled power management 2.2.6. PS/2 mouse and keyboard interface – PC/AT compatible keyboard controller (8242 compatible) with PS/2 mouse support – only available on an internal header 2.2.7. Serial ports six serial RS232 ports (COM1 – COM6) with 16 byte receive and transmit FIFO...