Power Conversion Power Generation Sensors Hall effect gaussmeters Gauss/Tesla meter Model 8030 For more than 60 years, F.W. Bell has been recognized for leadership in Gauss Meters. Today, F.W. Bell is building on that heritage with our new sixth generation of single, Model 8010 and three channel, Model 8030 Gauss Meters. Key features • TFT Color LCD Display with Backlighting • WVGA, 600 x 480 pixels The Model 8030 three channel GAUSS TESLA METER from F.W. Bell leads the way for Advanced Hall Effect Magnetic measurement technology. The easy to use front panel programming feature incorporates the latest in user control operations. The 8030 is capable of measuring and displaying seven different parameters per channel – flux density, frequency, temperature, min, max, peak and valley. With the 8030’s vector summation feature, that makes a total of 27 different parameters. This high accuracy instrument if fully equipped to meet most magnetic measuring application needs. Bell’s dynamic probe correcting software increases the 8030 measurement capabilities to make versatile magnetic measuring tool in the world. Key features include high resolution, high accuracy and high speed with a large TFT color LCD display with backlighting. The 8030 features 50 kHz frequency response, temperature and frequency measurements, Auto Zero, Auto Range, Hold functions for Peak Valley, Min and Max, corrected and uncorrected outputs for each channel and Vector Summation and angle. The Model 8030 provides the user with gauss, tesla, Oe, A/m, IEEE-488, RS-232, Ethernet RJ-45 and USB communications ports and Classifier output. The 8030 operates with Bell’s sixth generation Hall effect probes. These probes provide temperature compensation and measurement readings (0˚C to +50˚C) while monitoring the magnetic field. The easy to read TFT Color LCD with Backlighting is easily viewable in most light conditions and can be customized to meet use’s specific needs. Applications range from basic magnetic measuring to sensitive complicated three axis vector summing requirements. The F.W. Bell Model 8030 is fully CE compliant. • Over 40 standard probes available • Three channels • Automatic probe coefficient correction • Displays in Gauss, Tesla, amp/meter or Oe • Relative mode • Fully menu-driven for easy operation • Auto zero and auto calibration • IEEE-488, RS-232, Ethernet RJ45 and USB interface • CE-compliant • Manufactured to IS0 9000 standards • Comprehensive technical support Features ●Bright color Readout ●Fully menu driven for easy operation ●Large graphic color display ●Auto Zero and Auto Calibration ●Several probes available ●Automatic probe coefficient correction ●Displays in Gauss, Tesla, A//m or Oe ●Relative Mode ●Comprehensive Technical Support Pacific Scientific OECO Our product competencies and services: Aerospace valves | Thermal management solutions | Environmental control systems | Electro-mechanical products Ground fueling products | Industrial fluid controls | Aftermarket services

Power Conversion Power Generation Sensors Hall effect gaussmeters Gauss/Tesla meter Model 8030 Specifications Ranges *Low field probe † High field probe 1 µG (0.1nT) to 1G (0.1mT) {Dependent on Probe Type Used} Resolution Accuracy (Displayed reading) Frequency range Pacific Scientific-OECO DC basic AC basic Frequency range Accuracy (Corrected analog output) Frequency range DC mode (Uncorrected analog output) AC mode Analog output Output voltage Source impedance Connector Temperature coefficient Temperature range Operating Storage ±3V FS. or ±10V F.S. or adjustable from 0.1 – 9.9V <100 ohms Standard...