Manifolds VC
45Pages

Illustrations simplified, schematically drawn and not to scale. Product type Hot runner manifold of series VC which are characterised by the following dimensions:The manifolds can be supplied in standard shapes (I, H, X, Y) and in any realisable customised shape.The runners of standard manfiolds are mechnanically balanced. > MAZB M J2 1 28 7 AB Z C EDe1De2 De3 > 423 3 333 3 C E J2 3 45 6 > De1De2De3 3. Centre support4. Support pillar 5. Dowel 6. Fastening screw 7. Support pad8. Isolation bushing 1. Manifold block including heaters, connections and thermocouple2. Inlet bushing (including...

Illustrations simplified, schematically drawn and not to scale. Attached parts and accessories for hot runner manifolds of series VC : > M AZB C 1. MCS 30 30 ... 2. MSPL ... 5. MS 30 ... 6. ZAB ... 4. DIN6325: 6 m6 x45 / 8 m6 x453. DIN 912: M6 / M8 > Lcs (mm) Lsp(mm) B (mm) B(mm) 2) 2) 2 5 > MCS 30 30 40 MSPL 09 20 MCS 30 30 50 MSPL 09 40 40 20 max. 26 max. 20 max. 36 max. 40 50 40 3 > for nozzle sizefor nozzle size C (mm) 4 > 1) 03 / 04 / 0712 3040 1 6 1 2 Fastening screws > Lsp Dowel > BM Lcs Lms needed e g when face fit manifold nozzles are used.Support pads are only used when they are 3...

Illustrations simplified, schematically drawn and not to scale. Series & TypeNozzle seriesLength code 1) X= Y= > SeriesPosition in manifoldlength chartSeries & Type > J2 Length codeType > C X= Y= requested pitch dimensionsNozzle series the manifold will be combined with1-port-I-manifold > max. 12 > for nozzle sizefor nozzle size The values of these dimensions depend on the selected nozzle series. They can be found in the Synventive Hot Runner Guide.1)2)Hardened insert recommended; is not supplied with the hot runner system. Provide enough installation space for the nozzles! In case of lack...

Illustrations simplified, schematically drawn and not to scale. 1) Series & TypeNozzle seriesLength code X= Y= > SeriesPosition in manifoldlength chartSeries & Type > J2 C Length codeType > X= Y= requested pitch dimensionsNozzle series the manifold will be combined with1-port-I-manifold > max. 12 > for nozzle sizefor nozzle size The values of these dimensions depend on the selected nozzle series. They can be found in the Synventive Hot Runner Guide.1)2)Hardened insert recommended; is not supplied with the hot runner system. Provide enough installation space for the nozzles! In case of lack...

Illustrations simplified, schematically drawn and not to scale. Series & TypeNozzle seriesLength code 1) X= Y= > SeriesPosition in manifoldlength chartSeries & Type > C 3)4) Length codeType X= Y= requested pitch dimensionsNozzle series the manifold will be combined with2-port-I-manifold > The values of these dimensions depend on the selected nozzle series. They can be found in the Synventive Hot Runner Guide.1)2)3)4)Hardened insert recommended; is not supplied with the hot runner system. Provide enough installation space for the nozzles! In case of lack of space use next larger manifold...

Illustrations simplified, schematically drawn and not to scale. Series & TypeNozzle seriesLength code > SeriesPosition in manifoldlength chartSeries & Type > C Length codeType 2-port-I-manifold Plate bolts: M10 - 12.9 (2x per nozzle) > X= Y= requested pitch dimensionsNozzle series the manifold will be combined with > max. 12 > for nozzle sizefor nozzle size The values of these dimensions depend on the selected nozzle series. They can be found in the Synventive Hot Runner Guide.1)2)Hardened insert recommended; is not supplied with the hot runner system. Provide enough installation space for...

Illustrations simplified, schematically drawn and not to scale. Series & TypeNozzle seriesLength code > SeriesPosition in manifoldlength chartSeries & Type Length codeType 2-port-I-manifold Plate bolts: M10 - 12.9 (2x per nozzle) > X= Y= requested pitch dimensionsNozzle series the manifold will be combined with > max. 12 > for nozzle sizefor nozzle size The values of these dimensions depend on the selected nozzle series. They can be found in the Synventive Hot Runner Guide.1)2)Hardened insert recommended; is not supplied with the hot runner system. Provide enough installation space for the...

Illustrations simplified, schematically drawn and not to scale. Series & TypeNozzle seriesLength code 1) > C SeriesPosition in manifoldlength chartSeries & Type Length codeType > 2-port-I-manifold Plate bolts: M10 - 12.9 (2x per nozzle) X= Y= requested pitch dimensionsNozzle series the manifold will be combined with > max. 12 > for nozzle sizefor nozzle size The values of these dimensions depend on the selected nozzle series. They can be found in the Synventive Hot Runner Guide.1)2)Hardened insert recommended; is not supplied with the hot runner system. Provide enough installation space for...

Illustrations simplified, schematically drawn and not to scale. Series & TypeNozzle seriesLength code 1) X= Y= > J2 SeriesPosition in manifoldlength chartSeries & Type Length codeType > X= Y= requested pitch dimensionsNozzle series the manifold will be combined with3-port-I-manifold > max. 12 Plate bolts: M10 - 12.9 (2x per nozzle) > for nozzle sizefor nozzle size The values of these dimensions depend on the selected nozzle series. They can be found in the Synventive Hot Runner Guide.1)2)Hardened insert recommended; is not supplied with the hot runner system. Provide enough installation...

Illustrations simplified, schematically drawn and not to scale. 1) Series & TypeNozzle seriesLength code > J2 SeriesPosition in manifoldlength chartSeries & Type > Length codeType 3-port-I-manifold Plate bolts: M10 - 12.9 (2x per nozzle) > X= Y= requested pitch dimensionsNozzle series the manifold will be combined with > max. 12 > for nozzle sizefor nozzle size The values of these dimensions depend on the selected nozzle series. They can be found in the Synventive Hot Runner Guide.1)2)Hardened insert recommended; is not supplied with the hot runner system. Provide enough installation space...