250 Watts of CO2 Power With 700+ Watts Peak Pulse Power Bridge the gap between low and high power pulse capabilities with the new Pulstar p250 pulsed CO2 laser. Synrad proudly introduces the newest addition to the groundbreaking Pulstar family of pulsed CO2 lasers with the Pulstar p250. Featuring 250 watts of average power with an industry-first typical peak pulse power of 700 watts, the p250 provides users with an accessible entry point into high power laser processing, at an affordable price. Based on the same proven technology behind the success of Synrad’s i401, the p250’s peak pulse power takes materials processing a step further by allowing users to cut faster and drill deeper through a variety of materials, including aluminium, with minimal heat affect zone and superior cut edge quality. The p250’s longer tube design provides excellent power stability, making it ideal for applications that demand the highest levels of consistency and precision. If you’re one of the many who are eager to introduce refined high-power laser processing into your production lines, then the p250 is the undisputable competitive choice in today’s laser market. For more information about Synrad’s p250 pulse power laser, and other lasers from Synrad, visit www.synrad.com today! Pulstar p250 Core Features: Specifications: Model Average Output Power* Peak Pulse Power (typical) Peak Pulse Energy (typical) Pulse Length, max Rise Time Duty Cycle Range Power Stability (guaranteed from cold start) Mode Quality Beam Waist Diameter (at 1/e2) Beam Divergence (full angle) Ellipticity Polarization Wavelength (typical) Input Voltage / Current** Heat Load (max) Cooling Flow Rate*** Dimensions (in) Dimensions (mm) Weight • Average output power > 250W • Peak pulse power of 700W (typical) • Peak pulse energy (typical) of 600 mJ • Max pulse width of 1000 µs (1.0 ms) • Fast rise time of less than 40 µs • Exceptional power stability (±5%) • Pulsed operation up to 100 kHz • Duty cycle range of 0% to 50% • Excellent mode quality (M2 < 1.2) 8.5 ± 1mm < 2.0 mrad < 1.2 Linear (Horizontal) 10.2 - 10.7µm 48 ± 0.5 VDC / 90 A 4300 W Water 3.0 GPM, < 60 PSI 49.3 x 12.4 x 7.8 1252 x 315 x 198 120 lbs / 54.4 kg Specifications subject to change without notice. *Power level guaranteed for 12 months regardless of operating hours, applied over recommended coolant flow rate & temp. range. • Integrated RF drive - no bulky RF power supply or cables! • Modular electronics packaging based on proven i401 architecture • Built-in gas purge port • TCP/IP web-based diagnostics • Efficient RF design for low power consumption • Ideally suited for clean highspeed, low HAZ processing Outline and Mounting: BEAM EXIT .750 19.05 STATUS LEDS ETHERNET PORT WATER OUTLET (12mm TUBE FITTING) WATER INLET (12mm TUBE FITTING) **200A peak for < 1000 µs. ***At coolant temperatures above 22°C, derate power 0.5 W/°C to 1 W/°C up to a coolant temperature of 30 °C. ® Synrad, Inc., 4600 Campus Place • Mukilteo, WA 98275, USA tel: 1.425.349.3500 • fax: 1.425.349.3667 • e-mail: [email protected] Invisible Laser Radiation. Avoid eye or skin exposure to direct or scattered radiation. Class 4 Laser Product.